• Installing OS9 to G4 MDD 1.25Ghz

    From scole@vintageapplemac@gmail.com to comp.sys.mac.vintage on Fri Oct 4 07:07:00 2024
    From Newsgroup: comp.sys.mac.vintage

    My main vintage Mac for many years has been this wonderful G4 MDD
    1.25Ghz (single processor, not the dual processor version). As the last
    Mac capable of natively booting OS9, it is an absolute beast of a
    machine for the system (in fairness, OS9 runs great on a lot of older,
    slower machines, too; I had a Snow iMac G3 that was a beautiful OS9 experience), and I get a lot of enjoyment out of it.

    I have had cause to reinstall OS9 to it twice this year, and each time
    it has been painful. The first time was a long overdue reinstall to
    tidy up a decade's worth of careless use, so the pain felt worth it in
    the end, but the most recent (this week) was to fix a major system
    error caused by a simple mistake, and I became quite frustrated at what
    a nuisance it is to get OS9 reinstalled.

    Some context; I do not have OSX installed on this machine, nor do I
    want to have it on here. I have a Sonnet Tempo SATA PCI card that has
    two 128GB SSDs hooked to it, one of which is carved into three
    partitions, and one of those partitions is my OS9 boot drive. When
    everything is running smoothly, this results in a lightning-fast and
    silent machine (I replaced all the internal fans a long time ago with
    Silenx ones).

    There is no OS9 retail CD that will boot this machine. The original
    install media that came with it (which I do not have) was a 4 CD set,
    with an OS9 disk image on one of them; that is on the Garden at <http://macintoshgarden.org/apps/mac-os-922-powermac-g4-mdd>.

    To use that disk image, you need to be booted into OSX, which I don't
    have. OK, I figured, the first time I had to reinstall, how about I use
    my iMac G5 and have the MDD in FireWire Target Mode? No dice, Target
    Mode would not see the SSDs on the PCI card. I went Googling for any
    other way of doing it but eventually I dug out an old hard drive from
    my parts bin that I knew had some early flavour of OSX on and stuck
    that in the MDD.

    It booted, painfully slowly, to a very congested install of Panther
    (clearly, the machine I had pulled that drive from belonged to a web
    designer 20 years ago and he was sloppy as hell when it came to
    managing his workspace...) but I was able to download the OS9 dmg,
    mount it, and drag/drop the contents to the formatted SSD boot
    partition. Setting that as the startup disk and restarting, I was
    pleased to see OS9 booting (there was some further messing around with disabling some video card extensions to actually make it work properly,
    but that was simple enough).

    Second reinstall came round this week and I knew the process, but it
    was still a hellish drag to open up the computer, connect the OSX
    drive, boot to that (very slowly again... I subsequently did a fresh
    install of Tiger to it so I have a cleaner OSX to boot into in the
    future), and then mount and drag and drop. There has to be a simpler
    way, right? I can't find any hacked bootable 9.2.2 installer that would
    make my life simpler and negate the need for OSX. Anyone have any
    ideas or can point me in the right direction?

    I had a similar pantomime when reinstalling OS9 to an iMac G4 a few
    years ago, but at least that did have bootable (albeit
    machine-specific) OS9 media available that I was eventually able to
    source. I get why Apple supplied install media tailored for each
    machine, but it's a monumental pain in the arse, life would be so much
    simpler if they'd continued to release generic retail versions that
    would work on all machines.
    --- Synchronet 3.20a-Linux NewsLink 1.114
  • From Your Name@YourName@YourISP.com to comp.sys.mac.vintage on Sat Oct 5 10:36:03 2024
    From Newsgroup: comp.sys.mac.vintage

    On 2024-10-04 07:07:00 +0000, scole said:

    My main vintage Mac for many years has been this wonderful G4 MDD
    1.25Ghz (single processor, not the dual processor version). As the last
    Mac capable of natively booting OS9, it is an absolute beast of a
    machine for the system (in fairness, OS9 runs great on a lot of older,
    slower machines, too; I had a Snow iMac G3 that was a beautiful OS9 experience), and I get a lot of enjoyment out of it.

    I have had cause to reinstall OS9 to it twice this year, and each time
    it has been painful. The first time was a long overdue reinstall to
    tidy up a decade's worth of careless use, so the pain felt worth it in
    the end, but the most recent (this week) was to fix a major system
    error caused by a simple mistake, and I became quite frustrated at what
    a nuisance it is to get OS9 reinstalled.

    Some context; I do not have OSX installed on this machine, nor do I
    want to have it on here. I have a Sonnet Tempo SATA PCI card that has
    two 128GB SSDs hooked to it, one of which is carved into three
    partitions, and one of those partitions is my OS9 boot drive. When
    everything is running smoothly, this results in a lightning-fast and
    silent machine (I replaced all the internal fans a long time ago with
    Silenx ones).

    There is no OS9 retail CD that will boot this machine. The original
    install media that came with it (which I do not have) was a 4 CD set,
    with an OS9 disk image on one of them; that is on the Garden at <http://macintoshgarden.org/apps/mac-os-922-powermac-g4-mdd>.

    To use that disk image, you need to be booted into OSX, which I don't
    have. OK, I figured, the first time I had to reinstall, how about I use
    my iMac G5 and have the MDD in FireWire Target Mode? No dice, Target
    Mode would not see the SSDs on the PCI card. I went Googling for any
    other way of doing it but eventually I dug out an old hard drive from
    my parts bin that I knew had some early flavour of OSX on and stuck
    that in the MDD.

    It booted, painfully slowly, to a very congested install of Panther
    (clearly, the machine I had pulled that drive from belonged to a web
    designer 20 years ago and he was sloppy as hell when it came to
    managing his workspace...) but I was able to download the OS9 dmg,
    mount it, and drag/drop the contents to the formatted SSD boot
    partition. Setting that as the startup disk and restarting, I was
    pleased to see OS9 booting (there was some further messing around with disabling some video card extensions to actually make it work properly,
    but that was simple enough).

    Second reinstall came round this week and I knew the process, but it
    was still a hellish drag to open up the computer, connect the OSX
    drive, boot to that (very slowly again... I subsequently did a fresh
    install of Tiger to it so I have a cleaner OSX to boot into in the
    future), and then mount and drag and drop. There has to be a simpler
    way, right? I can't find any hacked bootable 9.2.2 installer that would
    make my life simpler and negate the need for OSX. Anyone have any
    ideas or can point me in the right direction?

    I had a similar pantomime when reinstalling OS9 to an iMac G4 a few
    years ago, but at least that did have bootable (albeit
    machine-specific) OS9 media available that I was eventually able to
    source. I get why Apple supplied install media tailored for each
    machine, but it's a monumental pain in the arse, life would be so much simpler if they'd continued to release generic retail versions that
    would work on all machines.

    The machine-specific install discs are those that ship with the
    computer, but there are also machine-independent retail discs for those upgrading their existing computers version of Mac OS.


    --- Synchronet 3.20a-Linux NewsLink 1.114
  • From scole@vintageapplemac@gmail.com to comp.sys.mac.vintage on Sat Oct 5 07:07:08 2024
    From Newsgroup: comp.sys.mac.vintage

    In article <041020240707006057%vintageapplemac@gmail.com>, scole <vintageapplemac@gmail.com> wrote:


    Second reinstall came round this week and I knew the process, but it
    was still a hellish drag to open up the computer, connect the OSX
    drive, boot to that (very slowly again... I subsequently did a fresh
    install of Tiger to it so I have a cleaner OSX to boot into in the
    future), and then mount and drag and drop. There has to be a simpler
    way, right? I can't find any hacked bootable 9.2.2 installer that would
    make my life simpler and negate the need for OSX. Anyone have any
    ideas or can point me in the right direction?

    Well, just had to reinstall OS9 to this machine *again*... Was fine
    yesterday evening but when I booted it this morning, folder with
    question mark appeared. Booted again holding option key, but the OS9
    boot drive did not appear to select. Went through the usual steps, zap
    PRAM etc, to no avail.

    Rather than open the machine up and connect that OSX drive I have, I
    thought I'd boot from my Tiger retail DVD and have a look using Disk
    Utility. The OS9 partition was greyed out, so tried to verify and
    repair it but got an "invalid key length" error, whatever that means.

    But then I had a brainwave; I had put the OS9 .dmg onto one of the
    other SSD partitions, so could I mount that using the retail DVD tools
    and then restore it to the OS9 partition as a fresh install? Turns out
    I could! Within a few minutes I was booting into a virgin 9.2.2,
    again...

    So, I have indeed found a marginally simpler way of installing OS9 to
    an G4 MDD 1.25Ghz!
    --- Synchronet 3.20a-Linux NewsLink 1.114
  • From scole@vintageapplemac@gmail.com to comp.sys.mac.vintage on Sat Oct 12 06:12:03 2024
    From Newsgroup: comp.sys.mac.vintage

    In article <vdpn42$ce1q$1@dont-email.me>, Your Name
    <YourName@YourISP.com> wrote:

    The machine-specific install discs are those that ship with the
    computer, but there are also machine-independent retail discs for those upgrading their existing computers version of Mac OS.

    Not for OS9 for this MDD, or so I've read on the web anywhere I've
    looked; all the info I've found is that the only official release of
    9.2.2 that's right for this machine is in the .dmg on one of the
    set-of-4 install CDs that shipped with it.

    And even that image isn't an actual bootable installer, it's more like
    a hard disk back-up image and the intent is to use Disk Utility in OSX
    to "restore" the back-up to a partition and that's how you get OS9 onto
    the G4 MDD 1.25Ghz. I was hoping that some bright spark might have
    hacked a bootable version of it I could burn to CD, but I didn't find
    such a thing when I was looking recently.
    --- Synchronet 3.20a-Linux NewsLink 1.114
  • From Your Name@YourName@YourISP.com to comp.sys.mac.vintage on Sat Oct 12 20:23:04 2024
    From Newsgroup: comp.sys.mac.vintage

    On 2024-10-12 05:12:03 +0000, scole said:
    In article <vdpn42$ce1q$1@dont-email.me>, Your Name
    <YourName@YourISP.com> wrote:

    The machine-specific install discs are those that ship with the
    computer, but there are also machine-independent retail discs for those
    upgrading their existing computers version of Mac OS.

    Not for OS9 for this MDD, or so I've read on the web anywhere I've
    looked; all the info I've found is that the only official release of
    9.2.2 that's right for this machine is in the .dmg on one of the
    set-of-4 install CDs that shipped with it.

    And even that image isn't an actual bootable installer, it's more like
    a hard disk back-up image and the intent is to use Disk Utility in OSX
    to "restore" the back-up to a partition and that's how you get OS9 onto
    the G4 MDD 1.25Ghz. I was hoping that some bright spark might have
    hacked a bootable version of it I could burn to CD, but I didn't find
    such a thing when I was looking recently.

    You may well be right about 9.2.2 specifically, since that is a minor
    update. The retail CD would likely have been 9.2 and then you're meant
    to use updaters.

    I'm not sure about that particular model. It's possible that it wasn't designed to boot in MacOS 9, so the "installer" is only for installing
    the Classic environment to use under MacOS X to run older programs.

    You could try one of these custom-made bootable installers (the second
    one is a newer version): <https://macintoshgarden.org/apps/mac-os-922-universal> <https://macintoshgarden.org/apps/mac-os-922-universal-install-2014>


    --- Synchronet 3.20a-Linux NewsLink 1.114
  • From scole@vintageapplemac@gmail.com to comp.sys.mac.vintage on Sat Oct 12 13:32:26 2024
    From Newsgroup: comp.sys.mac.vintage

    In article <ved84n$31rs$1@dont-email.me>, Your Name
    <YourName@YourISP.com> wrote:

    On 2024-10-12 05:12:03 +0000, scole said:

    Not for OS9 for this MDD, or so I've read on the web anywhere I've
    looked; all the info I've found is that the only official release of
    9.2.2 that's right for this machine is in the .dmg on one of the
    set-of-4 install CDs that shipped with it.

    And even that image isn't an actual bootable installer, it's more like
    a hard disk back-up image and the intent is to use Disk Utility in OSX
    to "restore" the back-up to a partition and that's how you get OS9 onto
    the G4 MDD 1.25Ghz. I was hoping that some bright spark might have
    hacked a bootable version of it I could burn to CD, but I didn't find
    such a thing when I was looking recently.

    You may well be right about 9.2.2 specifically, since that is a minor update. The retail CD would likely have been 9.2 and then you're meant
    to use updaters.

    I'm not sure about that particular model. It's possible that it wasn't designed to boot in MacOS 9, so the "installer" is only for installing
    the Classic environment to use under MacOS X to run older programs.

    This particular MDD variant is a native-OS9 booter; it's the "single
    CPU" version of the 1.25Ghz, released alongside the Dual 1.42Ghz MDD to
    provide continued native OS9; I think the story at the time was that
    there was quite an uproar in the design/photography/media sector that
    the 2002 (or was it 2003?) PowerMacs were OSX only (Classic Mode
    disregarded), which at that point therefore suddenly rendered a lot of industry-standard software temporarily defunct, so Apple put this
    machine on the market to retain OS9 nativity and made good sales volume
    out of it.

    You could try one of these custom-made bootable installers (the second
    one is a newer version): <https://macintoshgarden.org/apps/mac-os-922-universal> <https://macintoshgarden.org/apps/mac-os-922-universal-install-2014>

    Oh, huzzah! Thanks, man, these look promising. I will investigate. I
    did search the Garden for variations of "MDD OS9 Bootable" but never
    saw these, so much appreciation for flagging them up to me.
    --- Synchronet 3.20a-Linux NewsLink 1.114
  • From Chris Lindley@ferg@scotgate.org to comp.sys.mac.vintage on Tue Oct 15 10:30:14 2024
    From Newsgroup: comp.sys.mac.vintage

    In article <121020241332264707%vintageapplemac@gmail.com>, scole <vintageapplemac@gmail.com> wrote:

    In article <ved84n$31rs$1@dont-email.me>, Your Name
    <YourName@YourISP.com> wrote:

    On 2024-10-12 05:12:03 +0000, scole said:

    Not for OS9 for this MDD, or so I've read on the web anywhere I've looked; all the info I've found is that the only official release of 9.2.2 that's right for this machine is in the .dmg on one of the
    set-of-4 install CDs that shipped with it.

    And even that image isn't an actual bootable installer, it's more like
    a hard disk back-up image and the intent is to use Disk Utility in OSX
    to "restore" the back-up to a partition and that's how you get OS9 onto the G4 MDD 1.25Ghz. I was hoping that some bright spark might have
    hacked a bootable version of it I could burn to CD, but I didn't find such a thing when I was looking recently.

    You may well be right about 9.2.2 specifically, since that is a minor update. The retail CD would likely have been 9.2 and then you're meant
    to use updaters.

    I'm not sure about that particular model. It's possible that it wasn't designed to boot in MacOS 9, so the "installer" is only for installing
    the Classic environment to use under MacOS X to run older programs.

    This particular MDD variant is a native-OS9 booter; it's the "single
    CPU" version of the 1.25Ghz, released alongside the Dual 1.42Ghz MDD to provide continued native OS9; I think the story at the time was that
    there was quite an uproar in the design/photography/media sector that
    the 2002 (or was it 2003?) PowerMacs were OSX only (Classic Mode disregarded), which at that point therefore suddenly rendered a lot of industry-standard software temporarily defunct, so Apple put this
    machine on the market to retain OS9 nativity and made good sales volume
    out of it.

    You could try one of these custom-made bootable installers (the second
    one is a newer version): <https://macintoshgarden.org/apps/mac-os-922-universal> <https://macintoshgarden.org/apps/mac-os-922-universal-install-2014>

    Oh, huzzah! Thanks, man, these look promising. I will investigate. I
    did search the Garden for variations of "MDD OS9 Bootable" but never
    saw these, so much appreciation for flagging them up to me.

    Forgive me if you've already talked about this, but MacOS9Lives have a
    bootable 9.2.2 installer ISO that will boot on unsupported G4 Macs.
    It's commonly used for installing on G4 Mac Minis. On which I am now
    typing my first Usenet post in over two decades!

    http://www.macos9lives.com/downloads

    Cheers
    Ferg
    --- Synchronet 3.20a-Linux NewsLink 1.114
  • From scole@vintageapplemac@gmail.com to comp.sys.mac.vintage on Sat Oct 19 07:38:32 2024
    From Newsgroup: comp.sys.mac.vintage

    In article <151020241030148124%ferg@scotgate.org>, Chris Lindley <ferg@scotgate.org> wrote:

    In article <121020241332264707%vintageapplemac@gmail.com>, scole <vintageapplemac@gmail.com> wrote:

    In article <ved84n$31rs$1@dont-email.me>, Your Name
    <YourName@YourISP.com> wrote:

    You could try one of these custom-made bootable installers (the second one is a newer version): <https://macintoshgarden.org/apps/mac-os-922-universal> <https://macintoshgarden.org/apps/mac-os-922-universal-install-2014>

    Oh, huzzah! Thanks, man, these look promising. I will investigate. I
    did search the Garden for variations of "MDD OS9 Bootable" but never
    saw these, so much appreciation for flagging them up to me.

    Forgive me if you've already talked about this, but MacOS9Lives have a bootable 9.2.2 installer ISO that will boot on unsupported G4 Macs.
    It's commonly used for installing on G4 Mac Minis.

    I have downloaded the "2014" iso from the Garden linked upthread, which apparently originated from MACOS9Lives. I will burn to a CD and test it
    soon!


    On which I am now
    typing my first Usenet post in over two decades!

    Welcome back!
    --- Synchronet 3.20a-Linux NewsLink 1.114
  • From Chris Lindley@ferg@scotgate.org to comp.sys.mac.vintage on Sat Oct 19 21:03:55 2024
    From Newsgroup: comp.sys.mac.vintage

    In article <191020240738327322%vintageapplemac@gmail.com>, scole <vintageapplemac@gmail.com> wrote:

    In article <151020241030148124%ferg@scotgate.org>, Chris Lindley <ferg@scotgate.org> wrote:

    In article <121020241332264707%vintageapplemac@gmail.com>, scole <vintageapplemac@gmail.com> wrote:

    In article <ved84n$31rs$1@dont-email.me>, Your Name <YourName@YourISP.com> wrote:

    You could try one of these custom-made bootable installers (the second one is a newer version): <https://macintoshgarden.org/apps/mac-os-922-universal> <https://macintoshgarden.org/apps/mac-os-922-universal-install-2014>

    Oh, huzzah! Thanks, man, these look promising. I will investigate. I
    did search the Garden for variations of "MDD OS9 Bootable" but never
    saw these, so much appreciation for flagging them up to me.

    Forgive me if you've already talked about this, but MacOS9Lives have a bootable 9.2.2 installer ISO that will boot on unsupported G4 Macs.
    It's commonly used for installing on G4 Mac Minis.

    I have downloaded the "2014" iso from the Garden linked upthread, which apparently originated from MACOS9Lives. I will burn to a CD and test it
    soon!

    Good luck with the install! I went and gave away my trusty MDD a few
    years ago. I really regret that as they are such good looking machines!


    On which I am now
    typing my first Usenet post in over two decades!

    Welcome back!

    Many thanks!

    Cheers
    Ferg
    --- Synchronet 3.20a-Linux NewsLink 1.114
  • From dont.spam.usenet@dont.spam.usenet@googlemail.com (Hauke Fath) to comp.sys.mac.vintage on Thu Nov 14 13:42:39 2024
    From Newsgroup: comp.sys.mac.vintage

    scole <vintageapplemac@gmail.com> wrote:

    Well, just had to reinstall OS9 to this machine *again*...

    A bit late in the game, but this being usenet...

    Have you thought of getting an msata - ide adapter and an msata ssd, and
    put an emergency system installation on it? That would save you throwing
    in spinning rust after a failure, it would be a lot faster, and, hanging
    off the built-in ide, it would even be available in target disk mode.

    I have a remotely similar case where an Atto nubus scsi adapter in a
    Quadra 650 will not flush dirty buffers on reset, leaving the system
    volume unbootable. The fallback is a minimal Macintosh System
    installation on a different partition, from which I will have to run DiskWarrior (highly recommended) to fix the main boot volume.

    Cheerio,
    Hauke
    --
    Now without signature.
    --- Synchronet 3.20a-Linux NewsLink 1.114