• Dying HDD?

    From ant@ant@zimage.comANT (Ant) to comp.sys.ibm.pc.hardware.storage,alt.comp.periphs.hdd,comp.os.linux.hardware on Fri Jun 24 14:10:40 2022
    From Newsgroup: comp.sys.ibm.pc.hardware.storage

    11:16 -!- Irssi: INBOX ::: root@mybox: SMART error
    (CurrentPendingSector) detected on host:
    The following warning/error was logged by the smartd daemon:
    Device: /dev/sdb [SAT], 5 Currently unreadable (pending) sectors

    I quickly started a long test:
    $ sudo /usr/sbin/smartctl --test=long /dev/sdb
    smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-15-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

    === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
    Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
    Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
    Testing has begun.
    Please wait 256 minutes for test to complete.
    Test will complete after Fri Jun 24 16:12:36 2022 PDT
    Use smartctl -X to abort test.

    Minutes later, I checked to see what the detailed preliminary report had to say:
    $ sudo /usr/sbin/smartctl -a /dev/sdb
    smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-15-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

    === START OF INFORMATION SECTION ===
    Model Family: Western Digital Purple
    Device Model: WDC WD20PURX-64P6ZY0
    Serial Number: WD-WCC[deleted]
    LU WWN Device Id: 5 0014ee 20d7cb2d0
    Firmware Version: 80.00A80
    User Capacity: 2,000,398,934,016 bytes [2.00 TB]
    Sector Sizes: 512 bytes logical, 4096 bytes physical
    Rotation Rate: 5400 rpm
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ACS-2 (minor revision not indicated)
    SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
    Local Time is: Fri Jun 24 11:59:04 2022 PDT
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x84) Offline data collection activity
    was suspended by an interrupting command from host.
    Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having
    the read element of the test failed. Total time to complete Offline
    data collection: (25320) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported. Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 256) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x703d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 41
    3 Spin_Up_Time 0x0027 177 174 021 Pre-fail Always - 4108
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 728
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
    9 Power_On_Hours 0x0032 038 038 000 Old_age Always - 45430
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 708
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 586
    193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 699
    194 Temperature_Celsius 0x0022 108 107 000 Old_age Always - 39
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 5
    198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Extended offline Completed: read failure 90% 45430 44175392
    # 2 Extended offline Completed without error 00% 35939 - # 3 Short offline Completed without error 00% 35902 - # 4 Conveyance offline Completed without error 00% 32943 - # 5 Short offline Completed without error 00% 32943 - # 6 Extended offline Completed without error 00% 19216 - # 7 Conveyance offline Completed without error 00% 19200 - # 8 Short offline Completed without error 00% 19200 - # 9 Extended offline Completed without error 00% 14920 -

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.


    Uh, is that bad? :(
    --
    Dang summer and too many videos to watch and keep up.
    Note: A fixed width font (Courier, Monospace, etc.) is required to see this signature correctly.
    /\___/\ Ant(Dude) @ http://aqfl.net & http://antfarm.home.dhs.org.
    / /\ /\ \ Please nuke ANT if replying by e-mail.
    | |o o| |
    \ _ /
    ( )
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From ant@ant@zimage.comANT (Ant) to comp.sys.ibm.pc.hardware.storage,alt.comp.periphs.hdd,comp.os.linux.hardware on Fri Jun 24 14:44:27 2022
    From Newsgroup: comp.sys.ibm.pc.hardware.storage

    Short and long tests failed quickly. :(

    In comp.os.linux.hardware Ant <ant@zimage.comant> wrote:
    11:16 -!- Irssi: INBOX ::: root@mybox: SMART error
    (CurrentPendingSector) detected on host:
    The following warning/error was logged by the smartd daemon:
    Device: /dev/sdb [SAT], 5 Currently unreadable (pending) sectors

    I quickly started a long test:
    $ sudo /usr/sbin/smartctl --test=long /dev/sdb
    smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-15-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

    === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
    Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
    Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
    Testing has begun.
    Please wait 256 minutes for test to complete.
    Test will complete after Fri Jun 24 16:12:36 2022 PDT
    Use smartctl -X to abort test.

    Minutes later, I checked to see what the detailed preliminary report had to say:
    $ sudo /usr/sbin/smartctl -a /dev/sdb
    smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-15-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

    === START OF INFORMATION SECTION ===
    Model Family: Western Digital Purple
    Device Model: WDC WD20PURX-64P6ZY0
    Serial Number: WD-WCC[deleted]
    LU WWN Device Id: 5 0014ee 20d7cb2d0
    Firmware Version: 80.00A80
    User Capacity: 2,000,398,934,016 bytes [2.00 TB]
    Sector Sizes: 512 bytes logical, 4096 bytes physical
    Rotation Rate: 5400 rpm
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ACS-2 (minor revision not indicated)
    SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
    Local Time is: Fri Jun 24 11:59:04 2022 PDT
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x84) Offline data collection activity
    was suspended by an interrupting command from host.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 121) The previous self-test completed having
    the read element of the test failed. Total time to complete Offline
    data collection: (25320) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported. Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 256) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x703d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 41
    3 Spin_Up_Time 0x0027 177 174 021 Pre-fail Always - 4108
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 728
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
    9 Power_On_Hours 0x0032 038 038 000 Old_age Always - 45430
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 708
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 586
    193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 699
    194 Temperature_Celsius 0x0022 108 107 000 Old_age Always - 39
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 5
    198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Extended offline Completed: read failure 90% 45430 44175392
    # 2 Extended offline Completed without error 00% 35939 -
    # 3 Short offline Completed without error 00% 35902 -
    # 4 Conveyance offline Completed without error 00% 32943 -
    # 5 Short offline Completed without error 00% 32943 -
    # 6 Extended offline Completed without error 00% 19216 -
    # 7 Conveyance offline Completed without error 00% 19200 -
    # 8 Short offline Completed without error 00% 19200 -
    # 9 Extended offline Completed without error 00% 14920 -

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.


    Uh, is that bad? :(
    --
    Dang summer and too many videos to watch and keep up.
    Note: A fixed width font (Courier, Monospace, etc.) is required to see this signature correctly.
    /\___/\ Ant(Dude) @ http://aqfl.net & http://antfarm.home.dhs.org.
    / /\ /\ \ Please nuke ANT if replying by e-mail.
    | |o o| |
    \ _ /
    ( )
    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Marco Moock@mo01@posteo.de to comp.sys.ibm.pc.hardware.storage,alt.comp.periphs.hdd,comp.os.linux.hardware on Sun Jun 26 10:19:44 2022
    From Newsgroup: comp.sys.ibm.pc.hardware.storage

    Am Freitag, 24. Juni 2022, um 14:10:40 Uhr schrieb Ant:

    Device: /dev/sdb [SAT], 5 Currently unreadable (pending) sectors

    This is almost an indicator that something with the drive is wrong.
    That does not mean that the drive doesn't work anymore, but it means
    that at least some sectors ARE already broken. I recommend backing up
    data at least one time a week and maybe run a RAID.

    --- Synchronet 3.19c-Linux NewsLink 1.113
  • From Christopher Kelley@debianz@sdf.org to comp.sys.ibm.pc.hardware.storage,alt.comp.periphs.hdd,comp.os.linux.hardware on Sun Jul 31 22:43:23 2022
    From Newsgroup: comp.sys.ibm.pc.hardware.storage



    Ant wrote:

    # 1 Extended offline Completed: read failure 90% 45430 44175392

    I would say just based off of this line alone, it is time to get a new HDD. Hopefully your backups
    are recent!

    - debian

    --- Synchronet 3.19c-Linux NewsLink 1.113