From Newsgroup: comp.sys.ibm.ps2.hardware

@EDAF Plasma Display Adapter ADF is internal to something. Somebody
needs to go into set and view configuration and cycle through the video
items. That means going into each item and scrolling [F5 or F6] through
the settings.

Pictures of the set and view screens for the item[s] is what is needed.
You can just write down the individual settings, no need for a picture
of each setting,

FFAF PS/2 Model P70 (8573) Type 1 Planar 386DX-16
F4FF PS/2 Model P70 (8573) Type 2 Planar 386DX-16 or -20

0F4FFh or 0FFAFh 8573-P70 Built In Features

NumBytes 1

FixedResources
pos[0]=XXXXXX11b io 03f0h-03f7h 0d00h-0d07h
int 6
arb 2
mem 0fffe0000h - 0ffffffffh

sysmem 1024

"Serial Port"
The serial port can be set as Serial 1, Serial 2, or disabled.
<"SERIAL_1" [03f8h-03ffh int 4]>, 2 [02f8h-02ffh int 3], Disabled

"Parallel Port"
The parallel port can be set as Parallel 1 - 3 or disabled.
<"PARALLEL_1" [03bch-03bfh]>, 2 [0378h-037bh], 3 [0278h-027bh], Disabled
NOTE: Parallel 2 is the clone LPT1.


@EDAF Plasma Display Adapter internal to planar?


AdapterID DF9F Integrated Fixed Disk and Controller

DMA Arbitration Level
DMA channel used to transfer data
<"Level 5">, 6, 7, 0, 1, 3, 4

DMA Burst Pacing Interval
Interval between DMA transfer bursts during which the Micro Channel
is released by the

fixed disk controller for use by the processor.
<24 Microseconds>, 31, 16, Burst Disabled

DMA Pacing Control
Enables or disables "DMA Burst Pacing Interval"
<"Disabled">, Enabled

Time to Release
Time the fixed disk controller keeps the Micro Channel after being preempted. If 'DMA

Pacing Control' is <Enabled>, the Time to Release defaults to immediate.
Under normal

circumstances, select <6 Microseconds>.
<"6 Microseconds">, 3, Immediate

Fairness On/Off [Bus Arbitration]
Adapter releases control of the bus when it has been using it
exclusively
<"On">, Off

Primary/Alternate Port Addresses
Port addresses are <Primary> or <Alternate> [both work equally
well]. If there are two

DBA-ESDI disks, then select <Primary> for one and <Alternate> for the other.
<"Primary" (io 3510h-3517h)>, Alternate (3518-351f)
--- Synchronet 3.20a-Linux NewsLink 1.114