• Fidonet tosser

    From Matt Munson@1:218/109 to All on Fri Nov 25 16:20:28 2022

    Hello everybody!

    What do most of you use to toss mail to PCBoard? the internal tosser in 15.4 or something else?


    Matt


    --- GoldED+/W32-MSVC 1.1.5-b20180707
    * Origin: Inland Utopia Mail Center (1:218/109)
  • From Michael Luko@1:266/512 to Matt Munson on Sun Nov 27 10:45:00 2022
    What do most of you use to toss mail to PCBoard? the internal tosser
    in 15.4 or something else?

    I use qfront.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Ruben Figueroa@1:124/5014 to Matt Munson on Sun Nov 27 11:47:44 2022
    |10On 25 Nov 2022, Matt Munson said the following...|10

    Hello everybody!

    What do most of you use to toss mail to PCBoard? the internal tosser in 15.4 or something else?

    I use Irex to get the packets and the internal tosser of 15,4 to toss the mail.

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)
  • From Zazz@1:124/5015 to Michael Luko on Mon Nov 28 16:16:00 2022
    What do most of you use to toss mail to PCBoard? the internal tosser
    in 15.4 or something else?

    I use qfront.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096
    (1:266/512)

    I use the PCB v15.4 internal topser. How difficult is qfront to
    configure? Is there a conversion tool I could use?

    --- PCBoard (R) v15.4/250 Beta
    * Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)
  • From Michael Luko@1:266/512 to Zazz on Fri Dec 2 19:04:00 2022
    I use the PCB v15.4 internal topser. How difficult is qfront to
    configure? Is there a conversion tool I could use?

    Not that difficult. Not sure about conversion tools. Qfront for PCB
    works as a front end mailer and tosser is designed to work with PCB
    message bases with out having to convert message base formats.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Ruben Figueroa@1:124/5014 to Michael Luko on Mon Dec 5 13:04:13 2022
    |10On 02 Dec 2022, Michael Luko said the following...|10

    I use the PCB v15.4 internal topser. How difficult is qfront to configure? Is there a conversion tool I could use?

    Not that difficult. Not sure about conversion tools. Qfront for PCB
    works as a front end mailer and tosser is designed to work with PCB message bases with out having to convert message base formats.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096

    Thanks for the reply I will check into it.

    What is your opinion of Qfront?

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)
  • From Michael Luko@1:266/512 to Ruben Figueroa on Mon Dec 5 23:43:00 2022
    What is your opinion of Qfront?

    I like it. Never had any issues with it. I have version 1.20 final
    release with key generator from the author in my bbs file directories.

    QFP-120.ZIP 971892 02/09/06 Wide beta version 1.20a of QFront/PCB,
    a full-featured FidoNet mailer for PCBoard. This is the complete
    installation or upgrade package. Now includes key generator direct
    from the author! FREEWARE! Released 10-25-2000.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Zazz@1:124/5015 to Michael Luko on Mon Dec 5 13:48:00 2022
    I use the PCB v15.4 internal topser. How difficult is qfront to
    configure? Is there a conversion tool I could use?

    Not that difficult. Not sure about conversion tools. Qfront for PCB
    works as a front end mailer and tosser is designed to work with PCB

    I use the PCB v15.4 internal topser. How difficult is qfront to
    configure? Is there a conversion tool I could use?

    Not that difficult. Not sure about conversion tools. Qfront for PCB

    ok, I will play with it. How well does it work for you and anything I
    need to know to set it up? Like does it answer a bonkp or do I need
    somethint ahead of it?

    --- PCBoard (R) v15.4/250 Beta
    * Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)
  • From Ruben Figueroa@1:266/512 to Michael Luko on Wed Dec 7 17:29:00 2022
    What is your opinion of Qfront?

    I like it. Never had any issues with it. I have version 1.20 final release with key generator from the author in my bbs file directories.
    QFP-120.ZIP 971892 02/09/06 Wide beta version 1.20a of QFront/PCB, a full-featured FidoNet mailer for PCBoard. This is the complete installation or upgrade package. Now includes key generator direct from the author! FREEWARE! Released 10-25-2000.

    Doesn't Qfront require a comport? How do you have it setup for a telnet connection?

    my email is rdfigueroa@gmail.com if you want to correspond that way

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Michael Luko@1:266/512 to Ruben Figueroa on Wed Dec 7 22:40:00 2022
    Doesn't Qfront require a comport? How do you have it setup for a
    telnet connection?

    I use Com/IP on my telnet nodes. I know other pcb sysop using netfoss to simulate comport over internet connection.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Michael Luko@1:266/512 to Zazz on Wed Dec 7 22:45:00 2022
    ok, I will play with it. How well does it work for you and anything
    I need to know to set it up? Like does it answer a bonkp or do I
    need somethint ahead of it?

    I use Irex for binkp and FTP transport.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Ruben Figueroa@1:124/5014 to Michael Luko on Thu Dec 8 16:56:40 2022
    |10On 07 Dec 2022, Michael Luko said the following...|10

    Doesn't Qfront require a comport? How do you have it setup for a telnet connection?

    I use Com/IP on my telnet nodes. I know other pcb sysop using netfoss to simulate comport over internet connection.

    Well I don't have COM\IP but I do have Netserial which emulate a comport. I'll try that.

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)
  • From Ruben Figueroa@1:124/5014 to Michael Luko on Thu Dec 8 16:59:50 2022
    |10On 07 Dec 2022, Michael Luko said the following...|10

    Doesn't Qfront require a comport? How do you have it setup for a telnet connection?

    I use Com/IP on my telnet nodes. I know other pcb sysop using netfoss to simulate comport over internet connection.

    I have and have netfoss working with my PCB bbs. Not sure about netfoss emulating a comport. I will check into it

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)
  • From Ruben Figueroa@1:124/5014 to Michael Luko on Thu Dec 8 17:00:54 2022
    |10On 07 Dec 2022, Michael Luko said the following...|10

    ok, I will play with it. How well does it work for you and anything
    I need to know to set it up? Like does it answer a bonkp or do I
    need somethint ahead of it?

    I use Irex for binkp and FTP transport.

    I can do that

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)
  • From Michael Luko@1:266/512 to Ruben Figueroa on Thu Dec 8 21:33:00 2022
    I have and have netfoss working with my PCB bbs. Not sure about
    netfoss emulating a comport. I will check into it

    Netfoss is works with the doors over telnet. Netserial is the port
    redirector I belive. Been a while since I have looked into them. I still
    have the older multinode license of Com/IP before they went to one node
    licence of 99 dollars per node. I got it back when they offered a sysop special.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Zazz@1:124/5015 to Michael Luko on Wed Dec 7 17:12:00 2022
    I use the PCB v15.4 internal topser. How difficult is qfront to
    configure? Is there a conversion tool I could use?

    Not that difficult. Not sure about conversion tools. Qfront for PCB
    works as a front end mailer and tosser is designed to work with PCB
    message bases with out having to convert message base formats.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096
    (1:266/512)

    Well I installed it and it looks for comport? How do you make it work
    for a telnet connection?

    If you rather discuss thus over email, my email is
    rdfigueroa@gmail.com

    --- PCBoard (R) v15.4/250 Beta
    * Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)
  • From Daniel Path@2:371/52 to Zazz on Sat Dec 10 20:39:16 2022
    Hello Zazz,

    07 Dec 22 17:12, you wrote to Michael Luko:

    I use the PCB v15.4 internal topser. How difficult is qfront to configure? Is there a conversion tool I could use?

    Not that difficult. Not sure about conversion tools. Qfront for PCB works as a front end mailer and tosser is designed to work with PCB message bases with out having to convert message base formats.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

    Well I installed it and it looks for comport? How do you make it work
    for a telnet connection?

    If you rather discuss thus over email, my email is
    rdfigueroa@gmail.com

    pls don't switch to email, i am interested in this conversation ;)

    Regards,
    --
    dp

    telnet://bbs.roonsbbs.hu:1212 <<=-

    ... 10:35pm up 22 days, 16:56:21, load: 87 processes, 293 threads.
    --- GoldED/2 1.1.4.7+EMX
    * Origin: Roon's BBS - Budapest, HUNGARY (2:371/52)
  • From Ruben Figueroa@1:124/5014 to Daniel Path on Sat Dec 10 16:57:07 2022
    |10On 10 Dec 2022, Daniel Path said the following...|10

    Hello Zazz,

    07 Dec 22 17:12, you wrote to Michael Luko:

    I use the PCB v15.4 internal topser. How difficult is qfront to configure? Is there a conversion tool I could use?

    Not that difficult. Not sure about conversion tools. Qfront for PCB works as a front end mailer and tosser is designed to work with PCB message bases with out having to convert message base formats.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

    Well I installed it and it looks for comport? How do you make it work for a telnet connection?

    If you rather discuss thus over email, my email is rdfigueroa@gmail.com

    pls don't switch to email, i am interested in this conversation ;)

    Regards,
    --
    dp

    telnet://bbs.roonsbbs.hu:1212 <<=-

    Got ya

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)
  • From Martin Ruzicka@2:423/120 to Zazz on Sun Dec 11 13:54:41 2022
    Hello Zazz!

    Wednesday December 07 2022 17:12, you wrote to Michael Luko:


    If you rather discuss thus over email, my email is
    rdfigueroa@gmail.com


    I too join in with a request to keep the discussion here, please.

    THNX

    Martin

    --- FMail-W32 2.0.1.4
    * Origin: Aleco Experience BBS * Prague * [bbs.alecoexp.cz] (2:423/120)
  • From Ruben Figueroa@1:124/5014 to Martin Ruzicka on Sun Dec 11 16:20:44 2022
    |10On 11 Dec 2022, Martin Ruzicka said the following...|10

    Hello Zazz!

    Wednesday December 07 2022 17:12, you wrote to Michael Luko:


    If you rather discuss thus over email, my email is rdfigueroa@gmail.com


    I too join in with a request to keep the discussion here, please.

    THNX

    Will do

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)
  • From Zazz@1:124/5015 to Daniel Path on Mon Dec 12 11:17:00 2022
    I use the PCB v15.4 internal topser. How difficult is qfront
    to Z> -> configure? Is there a conversion tool I could use? Z> -> Z>
    Not that difficult. Not sure about conversion tools. Qfront for
    PCB Z> -> works as a front end mailer and tosser is designed to work
    with PCB Z> -> message bases with out having to convert message base formats. Z> -> Z> -> --- QScan/PCB v1.20a / 01-0462 Z> -> * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 Z> -> (1:266/512)

    Well I installed it and it looks for comport? How do you make it
    work Z> for a telnet connection?
    If you rather discuss thus over email, my email is Z>
    rdfigueroa@gmail.com
    pls don't switch to email, i am interested in this conversation ;)
    Regards,
    --
    dp

    Ok, I will keep posting here.

    --- PCBoard (R) v15.4/250 Beta
    * Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)
  • From Ruben Figueroa@1:124/5014 to Michael Luko on Fri Dec 16 20:04:42 2022
    |10On 07 Dec 2022, Michael Luko said the following...|10

    Doesn't Qfront require a comport? How do you have it setup for a telnet connection?

    I use Com/IP on my telnet nodes. I know other pcb sysop using netfoss to simulate comport over internet connection.

    do to need netfpss to run your doors that require a fossil or do you use something else?

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)
  • From Michael Luko@1:266/512 to Ruben Figueroa on Sat Dec 17 16:16:00 2022
    do to need netfpss to run your doors that require a fossil or do you
    use something else?

    I am using Winfoss for NT. Netfoss should work.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Ruben Figueroa@1:124/5014 to Michael Luko on Sun Dec 18 12:37:55 2022
    |10On 17 Dec 2022, Michael Luko said the following...|10

    do to need netfpss to run your doors that require a fossil or do you use something else?

    I am using Winfoss for NT. Netfoss should work.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096
    (1:266/512)


    Your bbs seems to be down as it connects and immediately disconnects me.

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)
  • From Ruben Figueroa@1:124/5014 to Michael Luko on Sun Dec 18 12:40:25 2022
    |10On 17 Dec 2022, Michael Luko said the following...|10

    do to need netfpss to run your doors that require a fossil or do you use something else?

    I am using Winfoss for NT. Netfoss should work.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096
    (1:266/512)

    I found Winfoss but it requires registration. Is there a release for it>

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)
  • From Ruben Figueroa@1:266/512 to Michael Luko on Sun Dec 18 14:09:00 2022
    As I said I am trying to setup Qfront with netserial. If You want to see what happens when you connect please telnet to
    pbmystic.rdfig.net:3141

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Michael Luko@1:266/512 to Ruben Figueroa on Sun Dec 18 18:11:00 2022
    As I said I am trying to setup Qfront with netserial. If You want to
    see what happens when you connect please telnet to
    pbmystic.rdfig.net:3141

    Will have to try later when I get home.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Michael Luko@1:266/512 to Ruben Figueroa on Sun Dec 18 18:15:00 2022
    Your bbs seems to be down as it connects and immediately disconnects
    me.

    Could have been ealier when I was doing updates which required
    rebooting. I am telneting in now and had no issues. Will check things
    when I get home later tonight.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Michael Luko@1:266/512 to Ruben Figueroa on Sun Dec 18 18:20:00 2022
    I found Winfoss but it requires registration. Is there a release for


    Not that I am aware. I think it should work unregistered. You just have
    to deal with the registation nag. Have you tried netfoss which I belive
    is free.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From RUBEN FIGUEROA@1:124/5013 to Michael Luko on Mon Dec 19 15:09:50 2022
    Your bbs seems to be down as it connects and immediately disconnects
    me.

    Could have been ealier when I was doing updates which required
    rebooting. I am telneting in now and had no issues. Will check things
    when I get home later tonight.

    I got on
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: WildCat Prison BBS, Mesquite Tx (1:124/5013)
  • From Rob Swindell@1:103/705 to Michael Luko on Fri Dec 23 21:11:07 2022
    Re: Re: Fidonet tosser
    By: Michael Luko to Ruben Figueroa on Sun Dec 18 2022 06:20 pm

    I found Winfoss but it requires registration. Is there a release for


    Not that I am aware. I think it should work unregistered. You just have
    to deal with the registation nag. Have you tried netfoss which I belive
    is free.

    Synchronet Virtual DOS Modem is also free (and open source): https://wiki.synchro.net/util:svdm
    --
    digital man (rob)

    Breaking Bad quote #3:
    Please tell me: how much is enough? How big does this pile have to be? - Skyler Norco, CA WX: 57.3øF, 67.0% humidity, 0 mph NNE wind, 0.00 inches rain/24hrs --- SBBSecho 3.20-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Ruben Figueroa@1:124/5014 to Michael Luko on Sun Jan 1 14:16:36 2023
    I uploaded qf.zip to your bbs. It contains my bat files for qfront. Please take a look.

    Also I played with starter.bat and bot qfront to answer. As a dummy with no fossil loaded I tried a game and I got dumped. Now when I try it again I get PCBOARD unexpected message and no connection.

    Well I typed pcboard.exe and try again and get connected. But No connection when I try again. Just same PCBoard message unexpected message.

    Any thoughts?

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)
  • From Michael Luko@1:266/512 to Ruben Figueroa on Sun Jan 1 19:30:00 2023
    when I try again. Just same PCBoard message unexpected message.

    Are you getting this message from qfront or pcboad?

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From Ruben Figueroa@1:266/512 to Michael Luko on Sun Jan 1 19:56:00 2023
    when I try again. Just same PCBoard message unexpected message.

    Are you getting this message from qfront or pcboad?

    I see this message when I use qfront to connect. It sees the connect and then tries to pass onto PCBoard. But I get the PCBOARD unexpected message. Remember I broke it when I once conneced to qfront and later after looking at messages. I tried a game with no fossil loaded and it dumped the conection.
    Now when I go look at the PCB filer folder I see bbsbatch.bat file. So somehow I broker the logice of the bat files.

    I delete the bbsbatch file and start qfront consoler and then try to connect and I get that PCBoard unexpected message.

    Just chasing my tail right now.

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)
  • From RUBEN FIGUEROA@1:124/5013 to Michael Luko on Mon Jan 2 14:30:30 2023
    when I try again. Just same PCBoard message unexpected message.

    Are you getting this message from qfront or pcboad?

    --- QScan/PCB v1.20a / 01-0462
    * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

    I think is is from qfront. the spawnbbs bat file does this on return
    from door
    --- Platinum Xpress/Win/WINServer v7.0
    * Origin: WildCat Prison BBS, Mesquite Tx (1:124/5013)
  • From Ruben Figueroa@1:124/5014 to Michael Luko on Wed Jan 18 14:06:30 2023
    I have Qfront connecting but when it tries to pass off the connection all I get is PCB console. It is like it doesn't know it is connected.

    Have you had a chance to review my bat files?

    Ruben Figueroa aka Zazz
    Mystic Prison Board Sysop
    telnet://pbmystic.rdfig.net:24
    Web: www.rdfig.net

    --- Mystic BBS v1.12 A48 (Windows/32)
    * Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)