Quick question here. Is it possible to select a node in the network node screen and just be able to go through the message area list and tag (using something like the spacebar) which echos downlinks/uplinks are connected to instead of going through each area one by one? If not, this would be a great feature to have to make linking nodes easier.
Quick question here. Is it possible to select a node in the network
node screen and just be able to go through the message area list and
tag (using something like the spacebar) which echos downlinks/uplinks
are connected to instead of going through each area one by one? If
not, this would be a great feature to have to make linking nodes
easier.
EzyCfg, Mail Areas, Message Areas > F10 to add downlinks/uplinks.
Press ENTER on each node you want to link. Press Pgdn/Pgup for next/previous message area. Press F10 to exit.
EzyCfg, Mail Areas, Message Areas > F10 to add downlinks/uplinks.
Press ENTER on each node you want to link. Press Pgdn/Pgup for next/previous message area. Press F10 to exit.
How about EzyCfg, Mail Areas, Node Links, F10 to add message
areas -- which is something kinda similar to what I was referring
to. Do the mass connection on a node by node basis instead of an
echo by echo basis.
Sysop: | DaiTengu |
---|---|
Location: | Appleton, WI |
Users: | 912 |
Nodes: | 10 (1 / 9) |
Uptime: | 143:03:51 |
Calls: | 12,136 |
Calls today: | 4 |
Files: | 186,513 |
Messages: | 2,230,689 |