On 12 Mar 2019 at 03:37p, Jeff Smith pondered and said...

system. Currently last time it happened was with my Mystic 1:14/5 system and according
to the logs the next previous time was with Paul's 21:1/100 Mystic
system. In testing it

Jeff, just reaching out here. I can see problems with you polling the Z21 NET
1 HUB looks like no correct AKAs are being presented?

[snip]

+ 2019.03.14 18:23:54 BINKP > Connect on slot 1/25 (65.103.12.161)
+ 2019.03.14 18:23:54 BINKP 1-HostName Unknown
+ 2019.03.14 18:23:54 BINKP 1-S: NUL OPT CRAM-MD5-f66e688ea332a93cb8dbb22a174cf960
+ 2019.03.14 18:23:54 BINKP 1-S: NUL SYS fsxHUB Risa [NET1]
+ 2019.03.14 18:23:54 BINKP 1-S: NUL ZYZ Avon
+ 2019.03.14 18:23:54 BINKP 1-S: NUL TIME Thu, 14 Mar 2019 18:23:54 1300
+ 2019.03.14 18:23:54 BINKP 1-S: NUL VER Mystic/1.12A43 binkp/1.0
+ 2019.03.14 18:23:54 BINKP 1-S: NUL BUILD 2019/03/03 01:35:01 Windows/32
+ 2019.03.14 18:23:54 BINKP 1-S: ADR 21:1/100@fsxnet 21:1/3@fsxnet 21:1/2@fsxnet 21:1/0@fsxnet 21:0/0@fsxnet
+ 2019.03.14 18:23:55 BINKP 1-R: NUL ZYZ Jeff Smith
+ 2019.03.14 18:23:55 BINKP 1-SysOp Jeff Smith
+ 2019.03.14 18:23:55 BINKP 1-R: NUL LOC Anoka, MN - bbs.ouijabrd.net
+ 2019.03.14 18:23:55 BINKP 1-Location Anoka, MN - bbs.ouijabrd.net
+ 2019.03.14 18:23:55 BINKP 1-R: NUL VER BBBS/Li6 v4.10 Toy-4 binkp/1.0
+ 2019.03.14 18:23:55 BINKP 1-Mailer BBBS/Li6 v4.10 Toy-4 binkp/1.0
+ 2019.03.14 18:23:55 BINKP 1-R: NUL NDL CM,IBM,IFT,INA
+ 2019.03.14 18:23:55 BINKP 1-Info NDL CM,IBM,IFT,INA
+ 2019.03.14 18:23:55 BINKP 1-R: ADR 1:282/1031.0@fidonet 21:1/128.1@fsxnet 1:299/0.0@fidonet 1:300/0.0@fidonet 1:290/0.0@fidonet
+ 2019.03.14 18:23:55 BINKP 1-R: PWD
+ 2019.03.14 18:23:55 BINKP 1-No matching address to authenticate
+ 2019.03.14 18:23:55 BINKP 1-Cannot authenticate client
+ 2019.03.14 18:23:55 BINKP 1-S: ERR Bad address or password
+ 2019.03.14 18:23:55 BINKP 1-Client shutting down

[snip]

On the face of it you're presenting a point address when the hub is looking
for a full address?

Best, Paul

Best, Paul

--- E:avon@bbs.nz ------ W:bbs.nz ---
--- K:keybase.io/avon --------------

--- Mystic BBS v1.12 A43 2019/03/03 (Windows/32)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (3:770/100)

Hello Paul,

Jeff, just reaching out here. I can see problems with you polling the Z21 NET 1 HUB looks like no correct AKAs are being presented?
[snip]
+ 2019.03.14 18:23:54 BINKP > Connect on slot 1/25 (65.103.12.161)
+ 2019.03.14 18:23:54 BINKP 1-HostName Unknown
+ 2019.03.14 18:23:54 BINKP 1-S: NUL OPT CRAM-MD5-f66e688ea332a93cb8dbb22a174cf960
+ 2019.03.14 18:23:54 BINKP 1-S: NUL SYS fsxHUB Risa [NET1]
+ 2019.03.14 18:23:54 BINKP 1-S: NUL ZYZ Avon
+ 2019.03.14 18:23:54 BINKP 1-S: NUL TIME Thu, 14 Mar 2019 18:23:54 1300
+ 2019.03.14 18:23:54 BINKP 1-S: NUL VER Mystic/1.12A43 binkp/1.0
+ 2019.03.14 18:23:54 BINKP 1-S: NUL BUILD 2019/03/03 01:35:01 Windows/32
+ 2019.03.14 18:23:54 BINKP 1-S: ADR 21:1/100@fsxnet 21:1/3@fsxnet

That is because I switched 21:1/128 over to Mystic at bbs.twisted-balloon.org (65.103.12.163) and now BBBS bbs.ouijabrd.net (65.103.12.161) is now 21:1/128.1.
I have been polling you from Mystic and can connect to you fine. I had just completed
the actual switch over and was testing the connection. I sent you an email regarding
the switchover so that you could make any necessary adjustments on your end.

The polling loop situation currently exists between 1:282/1031 BBBS and 1:14/5 Mystic.
And in the past did exist between 21:1/128 BBBS and you 21:1/100 Mystic. That is
where I think the confusion came from. I did notice that the problem happens when
BBBS polls Mystic but doesn't seem to happen if Mystic polls BBBS. I suspect that the
problem stems from either the way BBBS is detecting a completed connection or the way
that Mystic is expressing a completed connection.

Jeff

--- BBBS/Li6 v4.10 Toy-4
* Origin: Fidoneet: The Ouija Board - Anoka, MN -bbs.ouijabrd.net (1:282/1031)

This round of polling continued until I seen it happening and issued
the command 'bbbs bom d 1:14/5'.

190312 07:34 Region 14 IP Server, 1:14/5
190312 07:34 AKA: 1:14/0

Polling loop can happen if:

1) You have crashmail to nodenumber X, but remote doesn't present that nodenumber as primary / AKA.

2) Mail session is not fully completed and that poll message still exists.

If your above "bbbs bom d 1:14/5" helps then it's not case #1, as primary is 1:14/5.

Unfortunately BBBS doesn't log enough to see if it's case #2. Can you get debug
logs from remote site? Does it disconnect incoming connection for some reason?

--- BBBS/Li6 v4.10 Toy-4
* Origin: * BCG-Box, On The Air Since 11th February 1987! * (2:222/2)

Hello Kim,

This round of polling continued until I seen it happening and issued
the command 'bbbs bom d 1:14/5'.

Polling loop can happen if:
1) You have crashmail to nodenumber X, but remote doesn't present that nodenumber as primary / AKA.

Fortunately in this particular situation both systems are under my control. Heck, the
PC's are sitting next to each other. :-)

In this case actual crash mail isn't necessary. All I have to do is tell BBBS to poll
1:14/5 which is the primary AKA that Mystic presents and it will poll. And according
to the logs complete the poll. Then immediately poll again, and again...

2) Mail session is not fully completed and that poll message still exists.
If your above "bbbs bom d 1:14/5" helps then it's not case #1, as primary is 1:14/5.

Yes, entering the "bbbs bom d 1:14/5" looks to stop the polling loop.

Unfortunately BBBS doesn't log enough to see if it's case #2. Can you get debug
logs from remote site? Does it disconnect incoming connection for some reason?

With Mystic there are several levels of logging which includes "Debug". I will increase
the log level and see what it can tell me and keep you posted.

I did also notice that this only happens when BBBS polls a Mystic system. If mystic
polls BBBS no such polling loop occurs. As a temporary workaround I started having
Mystic do the polling. Which I will change back for testing purposes.

Jeff

--- BBBS/Li6 v4.10 Toy-4
* Origin: Fidoneet: The Ouija Board - Anoka, MN -bbs.ouijabrd.net (1:282/1031)

Hello Kim,

Unfortunately BBBS doesn't log enough to see if it's case #2. Can you get debu >logs from remote site? Does it disconnect incoming connection for some reason?

In talking with James Coyle it seems that Mystic also doesn't log enough to provide the needed info on the actual connection process. It looks to provide debug logging for other system operations though. If the situation changes or an update becomes available that allows for increased logging I will let you know on what information that I acquire regarding the situation.

Jeff

--- BBBS/Li6 v4.10 Toy-4
* Origin: Fidoneet: The Ouija Board - Anoka, MN -bbs.ouijabrd.net (1:282/1031)