1. Jasmine Takeout window will available when click `Takeout' button.
2. You may now look the takeout candidates with its status at the list box `Jasmine Takeout' window.
3. Select files that you want to takeout with use of Ctrl key.
4. Click `Takeout!' button, then Jasmine start to remove selected files form host.
5. All removed files are removed from Takeout Data File.

NOTE:

• You may eliminate the files you will not ever delete from Takeout candidates so the `Jasmine' won't search such files.
• You might be noticed as `Failed' when you will delete the files which are not available at your host/destination directory.

1. Eliminate the files from Takeout candidates.
   1. You may select files which you like to eliminate from the candidates with use of Ctrl key when the files are more than one.
   2. Push `Clear Takeout Data' button.
      The files you like to eliminate from the candidates will be eliminated from the candidates.

2. Select only files not existing at your local/source directory.
   Jasmine can automatically search files which are not available on local/source directory.
   1. Click `Select Files NOT Available at Local/Source Directory' button, then start search files.
   2. After search is finished, only NOT Available at Local/Source Directory files are selected.

3. Reconstruct Takeout Data.
   1. Push `Create Takeout Data' button will recover the candidates which you have eliminated from the candidates to the candidates once again by searching log files.

1. `Logon Retry' Function (FTP Mode)
   Check `Logon Retry' check box if you want retry logon when logon is failed. You may select retry number.

2. `Change UPPER to lower' Function
   Check `Change UPPER to lower' check box if you want change all UPPER case to lower case when Jasmine will upload/copy.

3. `Upload File Check' Function
   Check `Upload File Check' check box if you want to check upload/copy file list before upload/copy. You can select files that you want to upload/copy.

4. `Remember Upload Status' Function
   Check `Remember Upload Status' check box if you want to remember files that you set `Disabled' at `Upload File Check' window.
   * This function is valid when `Upload File Check' function is enabled.

5. `Retry Failed File at Next Time' Function
   Check `Retry Failed File' check box if you want to retry upload files that was failed at previously.

6. `Ignore File Extension' Function
   Check `Ignore File Extension' check box if you doesn't want to upload/copy files that has same extension.

7. `Run After Select Compulsory Upload Files' Function
   Check `Run After Compulsory Upload Files' check box if you want to upload/copy NOT UPDATED files.
   * When `Sequential Run Mode' is enabled, this function is valid at `Selected Site Only' mode.

• You may select file transfer mode from ASCII/Binary/Auto.

• When you select `Auto', all files will be transfered by Binary mode except files entered at `ASCII Mode' list.

1. Show Transfer Mode (FTP Mode)
   Check `Transfer Mode' check box if you want to indicate transfer mode every file.

2. Show File Size
   Check `File Size' check box if you want to indicate every upload/copy file size.

3. Show Upload Summary
   Check `Upload Summary' check box if you want to indicate upload/copy status.

• Check `Sequential Run Mode' check box if you want to use sequential upload/copy function.

• Check `Disable Sound During Sequential Running' check box is you want to turn off the sound during sequential running.

• Click `Cancel' button if you want to cancel upload/copy. This button will show after click `Run' button.

• Check `Exit Command' check box if you want to run any program after upload/copy is completed. Exit command should be set by Site.

• You may set sound set by clicking `Setup' button.

• You can customize indication of labels and buttons by your language. Parameters, see sample language file, english.lng. And anytime you can reset default labels (Jasmine restart is required).
  * Language files should exist at same directory of Jasmine.
  * Don't add/delete any parameters!

• Attached Language Files
  1. english.lng : `English' Language File (Sample)
  2. japanese.lng : `Japanese' Language File