|
|
TP General - OS/2 Warp 4 updated installation diskettes
|
To receive automatic notification
of driver updates click Profile above. |
Applicable countries/regions |
These update diskettes replace the "Install Disk 1" and "Install Disk 2" that comes with the OS/2 Warp version 4 Package, and are to be used only during the installation process. These diskettes are not to be used to update the installed OS/2 Warp version 4 components already on your system.
This release supports the systems: - ThinkPad 380XD, 385XD, 380Z - ThinkPad 390, 390E, 390X - ThinkPad i Series 1720, i Series 1721 - ThinkPad 560X, 560Z - ThinkPad 600, 600E, 600X - ThinkPad 770, 770E, 770ED, 770X, 770Z - ThinkPad T20, T21, T22, T23
To determine if you have to use the OS/2 Warp Version 4 Install Disk 1 Update and Install Disk 2 Update or not, refer to the "Summary of Changes" section. |
Supported machines |
ThinkPad 380XD(ALL), ThinkPad 380Z(ALL), ThinkPad 385XD(ALL), ThinkPad 390(ALL), ThinkPad 390E(ALL), ThinkPad 390X(ALL), ThinkPad 560X(ALL), ThinkPad 560Z(ALL), ThinkPad 600(ALL), ThinkPad 600E(ALL), ThinkPad 600X(ALL), ThinkPad 770(ALL), ThinkPad 770E/ED(ALL), ThinkPad 770X(ALL), ThinkPad 770Z(ALL), ThinkPad T20(ALL), ThinkPad T21(ALL), ThinkPad T22(ALL), ThinkPad i Series 172x(ALL) |
Version |
See File Descriptions |
Release Date |
2001/08/04 |
|
File link |
|
File size |
|
File description |
warp4iu.txt | | 11,057 | |
README for OS/2 Warp Version 4 Install Update Disk 1 version 1.06 and for OS/2 Warp Version 4 Install Update Disk 2 version 1.02
|
warp4iu1.EXE | | 930,265 | |
version 1.06 - OS/2 Warp Version 4 Install Update Disk 1 [DSKEXE]
|
warp4iu2.EXE | | 1,055,396 | |
version 1.02 - OS/2 Warp Version 4 Install Update Disk 2 [DSKEXE]
|
|
Click here
for instructions and limitations on downloading and creating the diskette.
This Additional Information field contains the following
sections:
I. What these diskettes do
II. Summary of changes
III. Installation instructions for OS/2 Warp version 4
IV. Installation instructions for OS/2 Warp version 4.51
V. Installation instructions for OS/2
Warp version 3
I. What these diskettes
do
IBM ThinkPad OS/2 Warp Version 4 Install Disk 1 Update:
The IBM ThinkPad OS/2 Warp Version 4 Install Disk 1 Update is a replacement
of IBM OS/2 Warp Version 4 Install Disk 1. This disk fixes the following problems:
- When ThinkPad 600, 600E, 600X, 770,
770E, 770ED, 770X, or 770Z is docked to SelectaDock III and an IDE device
in SelectaDock III is assigned to secondary IDE channel, the IDE device is
not recognized.
- When ThinkPad 600, 600E, 600X, 770,
770E, 770ED, 770X, or 770Z is docked to SelectaDock I/II, the system with
OS/2 Warp Version 4 installed stops in the middle of its start up.
- OS/2 Warp Version 4 cannot be installed
on hard disks that have over 8.4GB capacity.
- When a certain type of DVD-ROM drive
is installed, OS/2 Warp 4 takes a long time to boot.
- When OS/2 Warp 4 is installed in a
HPFS partition on ThinkPad T20, T21, or T22, Trap D may occur.
- OS/2 Warp Version 4 cannot be installed
on hard disks that have over 30GB capacity.
- When VGA or VGA GRADD device driver
is selected and installed on IBM ThinkPad T21 SXGA+ (1400 x 1050) resolution
model or T22 SXGA+ resolution model, opening DOS fullscreen command prompt
or OS/2 fullscreen command prompt gets screen blank. If an external monitor
is connected, it displays an image correctly.
IBM ThinkPad OS/2 Warp Version 4 Install
Disk 2 Update:
The IBM ThinkPad OS/2 Warp Version 4 Install Disk 2 Update is a replacement
of IBM OS/2 Warp Version 4 Install Disk 2. This disk fixes the following problem.
- OS/2 Warp V4 installation intermittently
fails due to MOUSE$ error.
- When OS/2 Warp 4 is installed in a
HPFS partition on ThinkPad T20, T21, T22, Trap D may occur.
- When VGA or VGA GRADD device driver
is selected and installed on IBM ThinkPad T21 SXGA+ (1400 x 1050) resolution
model or T22 SXGA+ resolution model, opening DOS fullscreen command prompt
or OS/2 fullscreen command prompt gets screen blank. If an external monitor
is connected, it displays an image correctly
II. Summary of
changes
OS/2 Warp Version 4 Install Disk
1 Update version 1.00
-(New) COPYFROMFLOPPY=1 added in CONFIG.SYS.
- (Fix) IBM1S506.ADD updated.
OS/2 Warp Version 4 Install Disk
1 Update version 1.01
-(Fix) IBM1S506.ADD updated.
OS/2 Warp Version 4 Install Disk
1 Update version 1.02
-(Fix) IBM1S506.ADD, IBMIDECD.FLT,
OS2DASD.DMD updated
OS/2 Warp Version 4 Install Disk
1 Update version 1.04
-(Fix) IBM1S506.ADD, IBMIDECD.FLT,
OS2DASD.DMD updated
OS/2 Warp Version 4 Install Disk
1 Update version 1.05
-(New) IBM1S506.ADD updated
-(Fix) SCREEN01.SYS updated
OS/2 Warp Version 4 Install Disk
1 Update version 1.06
-(New) IBM1S506.ADD updated
-(Fix) IBMIDECD.FLT updated
-(Fix) OS2DASD.DMD updated
-(Fix) SCREEN01.SYS updated
-(New) IBM ThinkPad T23 support
OS/2
Warp Version 4 Install Disk 2 Update version 1.00
-(New) DOSCALL1.DLL updated.
OS/2 Warp Version 4 Install Disk
2 Update version 1.01
-(Fix) SCREEN01.SYS, SETVGA.CMD updated
- (New) FIXVGA.CMD
OS/2 Warp Version 4 Install Disk
2 Update version 1.02
-(Fix) SCREEN01.SYS updated
-(Fix) FIXVGA.CMD updated
-(Fix) FIXVGA added
-(Fix) SETVGA.CMD removed
III. Installation instructions for OS/2 Warp version 4
OS/2 Warp Version 4 comes with three diskettes for installation. These update
disks are replacements for Disk 1 and Disk 2.
- Install OS/2 Warp Version 4 from the original Install Disk.
- When you are prompted to insert Disk 1, use Install Disk1
Update.
- When you are prompted to insert Disk 2, use Install Disk2
Update.
- Continue installing OS/2 Warp Version 4 until you are prompted
to restart your computer for the first time.
- When you are prompted to restart your computer, do not proceed.
- Press F3
to go to the command prompt screen.
- At the command prompt screen, type the following command to
run the batch file. The batch file is available on Install Disk2 update. A:\FIXVGA.CMD
x: where, x: denotes the boot drive of OS/2 Warp Version 4. In other
words, the drive letter to which you are installing OS/2 Warp Version 4.
- Type EXIT and
press the Enter key
to go back to the previous screen.
- Remove the diskette from the floppy drive.
- Press the Enter
key to restart your computer.
- Continue installing
OS/2 Warp Version 4.
- When you complete the installation, open OS/2 command prompt
screen.
- Insert 'Install Disk2 Update' in the floppy drive.
- At the command prompt screen, type the following command to
run the batch file. A:\FIXVGA.CMD
x: where,
x: denotes the boot drive of OS/2 Warp Version 4.
- Remove the diskette
from the floppy drive.
- Type EXIT,
then press the Enter key to close the command prompt screen.
- Properly shutdown OS/2
Warp Version 4, and restart your computer.
- Proceed to install OS/2
Warp Version 4 FixPack and device drivers.
NOTES:
- When
you install any versions of OS/2 Warp Version 4 Base FixPak and OS/2 Warp
Base Device Driver FixPak at version XR_D001, you may be prompted whether
you want to replace IBM1S506.ADD module or not. Then choose No to not
replace IBM1S506.ADD module or your computer will not be able to identify
the IDE controller in IBM ThinkPad Dock. If you accidentally choose Yes
and the module is replaced, then copy IBM1S506.ADD module from the 'Install
Disk1 Update' to \OS2\BOOT directory of your computer after you complete the
FixPak installation.
-
It is strongly recommended to run FIXVGA.CMD batch file whenever you change
display driver to "VGA" or "VGAGRADD" if your model of IBM ThinkPad computer
is IBM ThinkPad T21 SXGA+ (1400 x 1050) resolution model or IBM ThinkPad T22
SXGA+ resolution model.
IV. Installation
instructions for OS/2 Warp version 4.51
For OS/2 Warp Convenience Package Version 4.51, you do not have to use these
diskettes. Instead, OS/2 Warp Convenience Package comes with Installation CD,
which has the boot capability. First obtain necessary updates from OS/2 Device
Driver Pak On-line web site, install OS/2 Warp Convenience Package, and then
install updates obtained from OS/2 Device Driver Pak On-line. The information
and updates are available from the following URL:
http://service.software.ibm.com/os2ddpak/
http://service5.boulder.ibm.com/2bcprod.nsf
Several models of IBM ThinkPad do not support IBM OS/2 Warp Version 4.51
When the home page appears, do the following: (The procedure is subject to change
without prior notice)
- If you already read
and agreed to the Program License Agreement, click on I have read the Program
License Agreement and AGREE to its terms, and skip to step 6 below.
- Otherwise, Click on
I want to read the Program License Agreement.
- Read the Program License
Agreement.
- Click on ACCEPT
if you agree to its terms and go to the next page.
- Click on Continue...
- Click on Systems.
- Click on IBM Corporation
(IBM PC Company - Mobile Systems - ThinkPad).
- Click on a model name
of your IBM ThinkPad computer.
- Follow the instructions.
V. Installation
instructions for OS/2 Warp version 3
The information is available from the following web site:
http://service.software.ibm.com/os2ddpak/
http://service5.boulder.ibm.com/2bcprod.nsf
Several models of IBM ThinkPad do not support IBM OS/2 Warp Version 3
When the home page appears, do the following: (The procedure is subject to change
without prior notice)
- If you already read and agreed to the Program License Agreement, click
on I have read the Program License Agreement and AGREE to its terms,
and skip to step 6 below.
- Otherwise, Click on I want
to read the Program License Agreement.
- Read the Program License Agreement.
- Click on ACCEPT
if you agree to its terms and go to the next page.
- Click on Continue...
- Click on OS/2 Component Updates.
- Click on Installation Diskette
Updates.
- Click on PIIX Busmaster /
>30GB Drive Support.
- Follow the instructions.
|
Document id: YAST-3MARH8
|
Last modified: 2001-09-19
|
Copyright © 2001 IBM Corporation
|
|
|