From Newsgroup: comp.sys.ibm.ps2.hardware

And so my penitent sufferings continue.
--- Synchronet 3.20a-Linux NewsLink 1.114

From Newsgroup: comp.sys.ibm.ps2.hardware


https://www.ebay.com/itm/186183177464

just tracking the pictures...
--- Synchronet 3.20a-Linux NewsLink 1.114

From Newsgroup: comp.sys.ibm.ps2.hardware


https://www.ebay.com/itm/325714874221
--- Synchronet 3.20a-Linux NewsLink 1.114

From Newsgroup: comp.sys.ibm.ps2.hardware

https://www.ebay.com/itm/294831752097
--- Synchronet 3.20a-Linux NewsLink 1.114

From Newsgroup: comp.sys.ibm.ps2.hardware

https://www.ebay.com/itm/334333855294
--- Synchronet 3.20a-Linux NewsLink 1.114

From Newsgroup: comp.sys.ibm.ps2.hardware

https://www.ebay.com/itm/141167226383
--- Synchronet 3.20a-Linux NewsLink 1.114

From Newsgroup: comp.sys.ibm.ps2.hardware

https://web.archive.org/web/19970614043821/http://www.smc.com/network/arcnet/ps310.html

SMC's newest ARCNET® Micro Channel™ Architecture board, the 16­bit PS310, contains dual connectors: coax for star or bus configurations,
and twisted pair for star or daisy­chain configurations.

This board is a direct replacement for our ARCNETPS 110 and PS210 coax
boards. To preserve compatibility with these older products, the new
PS310 uses the same Micro Channel Architecture ID and operates with the
same NetWare® drivers.

We've also added diagnostic LEDs and an on­board socket for an optional auto­boot PROM, features not available on our older boards. And, by
combining our latest VLSI (Very Large­Scale Integration) devices with
Surface Mount Technology, we've been able to reduce the board's size and increase its reliability.

Dead link
ARCNET.EXE -The latest drivers for the SMC Arcnet cards, including
WIN95,WFW, Netware ODI drivers, NDIS drivers, Netbios drivers V. 0.04 ftp://www.smc.com/pub/nics/latest/arcnet.exe
--- Synchronet 3.20a-Linux NewsLink 1.114

From Newsgroup: comp.sys.ibm.ps2.hardware

;ARCNET-PS310 Configuration Diskette Program
;SMC part number 130.090501 v3.00
;File @6014.adf
;Version 2.0 Rev C
;Bob Galazka 02-05-92
AdapterID 06014h
AdapterName "Standard Microsystems Corporation ARCNET-PS110/210/310"
NumBytes 4
nameditem
Prompt "RAM Buffer Base Address"
Choice "Segment D000" pos[0]=1000XXXXb mem 0d0000h-0d1fffh
Choice "Segment D200" pos[0]=1001XXXXb mem 0d2000h-0d3fffh
Choice "Segment D400" pos[0]=1010XXXXb mem 0d4000h-0d5fffh
Choice "Segment D600" pos[0]=1011XXXXb mem 0d6000h-0d7fffh
Choice "Segment D800" pos[0]=1100XXXXb mem 0d8000h-0d9fffh
Choice "Segment DA00" pos[0]=1101XXXXb mem 0da000h-0dbfffh
Choice "Segment DC00" pos[0]=1110XXXXb mem 0dc000h-0ddfffh
Choice "Segment DE00" pos[0]=1111XXXXb mem 0de000h-0dffffh
Choice "Segment C000" pos[0]=0000XXXXb mem 0c0000h-0c1fffh
Choice "Segment C200" pos[0]=0001XXXXb mem 0c2000h-0c3fffh
Choice "Segment C400" pos[0]=0010XXXXb mem 0c4000h-0c5fffh
Choice "Segment C600" pos[0]=0011XXXXb mem 0c6000h-0c7fffh
Choice "Segment C800" pos[0]=0100XXXXb mem 0c8000h-0c9fffh
Choice "Segment CA00" pos[0]=0101XXXXb mem 0ca000h-0cbfffh
Choice "Segment CC00" pos[0]=0110XXXXb mem 0cc000h-0cdfffh
Choice "Segment CE00" pos[0]=0111XXXXb mem 0ce000h-0cffffh
Help
"Select one of these base addresses for the ARCNET Controller's
RAM buffer. Be sure the address you select has not been
used by any other expansion card (a conflict is indicated by
an asterisk)."
nameditem
Prompt "I/O Port Address Range"
Choice "02E0-02E7" pos[1]=XXXX0000b io 02e0h-02e7h
Choice "0300-0307" pos[1]=XXXX0001b io 0300h-0307h
Choice "0350-0357" pos[1]=XXXX0010b io 0350h-0357h
Choice "1988-198F" pos[1]=XXXX0011b io 1988h-198fh
Choice "2010-2017" pos[1]=XXXX0100b io 2010h-2017h
Choice "5678-567F" pos[1]=XXXX0101b io 5678h-567fh
Choice "5900-5907" pos[1]=XXXX0110b io 5900h-5907h
Choice "8088-808F" pos[1]=XXXX0111b io 8088h-808fh
Choice "8910-8917" pos[1]=XXXX1000b io 8910h-8917h
Choice "9C80-9C87" pos[1]=XXXX1001b io 9c80h-9c87h
Choice "ADB8-ADBF" pos[1]=XXXX1010b io 0adb8h-0adbfh
Choice "B4E8-B4EF" pos[1]=XXXX1011b io 0b4e8h-0b4efh
Choice "BAD8-BADF" pos[1]=XXXX1100b io 0bad8h-0badfh
Choice "D0D0-D0D7" pos[1]=XXXX1101b io 0d0d0h-0d0d7h
Choice "E8D0-E8D7" pos[1]=XXXX1110b io 0e8d0h-0e8d7h
Choice "F8E8-F8EF" pos[1]=XXXX1111b io 0f8e8h-0f8efh
Help
"Select one of these address ranges for the ARCNET Controller's
I/O Ports. Be sure the address range you select has not been
used by any other expansion card (a conflict is indicated
by an asterisk)."
nameditem
Prompt "Interrupt Level"
Choice "IRQ 2 (9)" pos[0]=XXXX100Xb int 9
Choice "IRQ 3" pos[0]=XXXX000Xb int 3
Choice "IRQ 4" pos[0]=XXXX001Xb int 4
Choice "IRQ 5" pos[0]=XXXX010Xb int 5
Choice "IRQ 7" pos[0]=XXXX011Xb int 7
Choice "IRQ 10" pos[0]=XXXX101Xb int 10
Help
"Select an Interrupt Level for the ARCNET Controller.
It is strongly recommended that you select an Interrupt
Level that has not been used by any other expansion card."
nameditem
Prompt "Node Address High Digit"
Choice "F" pos[2]=1111XXXXb
Choice "E" pos[2]=1110XXXXb
Choice "D" pos[2]=1101XXXXb
Choice "C" pos[2]=1100XXXXb
Choice "B" pos[2]=1011XXXXb
Choice "A" pos[2]=1010XXXXb
Choice "9" pos[2]=1001XXXXb
Choice "8" pos[2]=1000XXXXb
Choice "7" pos[2]=0111XXXXb
Choice "6" pos[2]=0110XXXXb
Choice "5" pos[2]=0101XXXXb
Choice "4" pos[2]=0100XXXXb
Choice "3" pos[2]=0011XXXXb
Choice "2" pos[2]=0010XXXXb
Choice "1" pos[2]=0001XXXXb
Choice "0" pos[2]=0000XXXXb
Help
"Each ARCNET Controller must be assigned a unique node
address or node ID in the range 01 to FF hexadecimal
(1 to 255 decimal). Select one of these addresses for
the most significant hexadecimal digit. Selecting 00
will disable the PS310 ARCNET Controller. Do not select
00 for a PS110 or PS210 ARCNET Controller."
nameditem
Prompt "Node Address Low Digit"
Choice "F" pos[2]=XXXX1111b
Choice "E" pos[2]=XXXX1110b
Choice "D" pos[2]=XXXX1101b
Choice "C" pos[2]=XXXX1100b
Choice "B" pos[2]=XXXX1011b
Choice "A" pos[2]=XXXX1010b
Choice "9" pos[2]=XXXX1001b
Choice "8" pos[2]=XXXX1000b
Choice "7" pos[2]=XXXX0111b
Choice "6" pos[2]=XXXX0110b
Choice "5" pos[2]=XXXX0101b
Choice "4" pos[2]=XXXX0100b
Choice "3" pos[2]=XXXX0011b
Choice "2" pos[2]=XXXX0010b
Choice "1" pos[2]=XXXX0001b
Choice "0" pos[2]=XXXX0000b
Help
"Each ARCNET Controller must be assigned a unique node
address or node ID in the range 01 to FF hexadecimal
(1 to 255 decimal). Select one of these addresses for
the least significant hexadecimal digit. Selecting 00
will disable the PS310 ARCNET Controller. Do not select
00 for a PS110 or PS210 ARCNET Controller."
nameditem
Prompt "Network Timeout Parameter"
Choice "Normal" pos[1]=11XXXXXXb
Choice "Med L" pos[1]=10XXXXXXb
Choice "Med H" pos[1]=01XXXXXXb
Choice "Maximum" pos[1]=00XXXXXXb
Help
"Select one of these addresses for the ARCNET Controller's
Timeout Parameter. Be sure to select the same parameter
for all the controllers on the network. Under normal
circumstances, select <Normal>."
nameditem
Prompt "PROM Socket Base Address"
Choice "PROM NOT USED" pos[3]=XXX00000b
Choice "Segment D000 " pos[3]=XXX11000b mem 0d0000h-0d1fffh
Choice "Segment D200 " pos[3]=XXX11001b mem 0d2000h-0d3fffh
Choice "Segment D400 " pos[3]=XXX11010b mem 0d4000h-0d5fffh
Choice "Segment D600 " pos[3]=XXX11011b mem 0d6000h-0d7fffh
Choice "Segment D800 " pos[3]=XXX11100b mem 0d8000h-0d9fffh
Choice "Segment DA00 " pos[3]=XXX11101b mem 0da000h-0dbfffh
Choice "Segment DC00 " pos[3]=XXX11110b mem 0dc000h-0ddfffh
Choice "Segment DE00 " pos[3]=XXX11111b mem 0de000h-0dffffh
Choice "Segment C000 " pos[3]=XXX10000b mem 0c0000h-0c1fffh
Choice "Segment C200 " pos[3]=XXX10001b mem 0c2000h-0c3fffh
Choice "Segment C400 " pos[3]=XXX10010b mem 0c4000h-0c5fffh
Choice "Segment C600 " pos[3]=XXX10011b mem 0c6000h-0c7fffh
Choice "Segment C800 " pos[3]=XXX10100b mem 0c8000h-0c9fffh
Choice "Segment CA00 " pos[3]=XXX10101b mem 0ca000h-0cbfffh
Choice "Segment CC00 " pos[3]=XXX10110b mem 0cc000h-0cdfffh
Choice "Segment CE00 " pos[3]=XXX10111b mem 0ce000h-0cffffh
Help
"Select one of these base addresses for the Boot PROM.
Be sure the address you select has not been used by another
expansion card (a conflict is indicated by an asterisk).
If no PROM is installed, or you wish to disable it, select
PROM NOT USED."
;end of @6014.adf

--- Synchronet 3.20a-Linux NewsLink 1.114

From Newsgroup: comp.sys.ibm.ps2.hardware



Louis Ohland wrote:

ARCNET.EXE -The latest drivers for the SMC Arcnet cards, including WIN95,WFW, Netware ODI drivers, NDIS drivers, Netbios drivers V. 0.04 ftp://www.smc.com/pub/nics/latest/arcnet.exe

--- Synchronet 3.20a-Linux NewsLink 1.114

From Newsgroup: comp.sys.ibm.ps2.hardware

This is Object code, -NOT- Source code !

Windows 98 ARCNET NDIS 4.0 Driver 1.1 arcnet98.exe 13K 11/8/99 https://web.archive.org/web/20050306175525/http://www.smsc.com/main/tools/arcnet/arcnet98.exe

ODI Drivers for NetWare 2.x (Client and Server) tmcodi.zip 72K 2/7/96 https://web.archive.org/web/20050306175525/http://www.smsc.com/main/tools/arcnet/tmcodi.zip

Windows NT and 95 ARCNET NDIS Miniport v3.x and 4.0 v1.1 w95nt.exe
114K 11/8/99 https://web.archive.org/web/20051125192313/http://www.smsc.com/main/tools/arcnet/w95nt.exe
--- Synchronet 3.20a-Linux NewsLink 1.114

From Newsgroup: comp.sys.ibm.ps2.hardware

https://community.element14.com/members-area/personalblogs/b/blog/posts/arcnet-mca-project
--- Synchronet 3.20a-Linux NewsLink 1.114

From Newsgroup: comp.sys.ibm.ps2.hardware

https://www.ccontrols.com/pdf/Tutorial.pdf
--- Synchronet 3.20a-Linux NewsLink 1.114