1. Forum
  2. Fidonet
  3. MBSE

  • Marking a node as black balled

    From Vincent Coen@2:250/1 to All on Sun May 15 19:39:34 2022
    Hello All!

    Is there a way within mbse of setting a specific node address to be totally ignore just as soon as its address line is received ?

    Why, I have a node in Switzerland who polls every minute of all hours and some time twice at the same time with a bad password.

    Now I did set on, every debug setting for almost everything to try and show the
    password being used but to no avail - but I am sure that there was a setting to
    get passwords used displayed if the did not match.
    Cannot find it now with v1.0.8.

    As I gave up on that great idea I have removed the node from my set up but of course that has not made any difference and is still giving the error code 121.

    It does show in error.log as :

    02-May-2022 17:15:36 mbcico[2192699] Binkp: TCP rcv error, tty status: Error

    and this appear every minute :(


    Vincent

    --- Mageia Linux v8 X64/Mbse v1.0.8/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Andrew Leary@1:320/219 to Vincent Coen on Sun May 15 16:43:27 2022

    Hello Vincent!

    15 May 22 19:39, you wrote to all:

    Is there a way within mbse of setting a specific node address to be totally ignore just as soon as its address line is received ?

    If they always call from the same IP address, just configure your firewall to reject connections from that IP.

    Why, I have a node in Switzerland who polls every minute of all hours
    and some time twice at the same time with a bad password.

    Now I did set on, every debug setting for almost everything to try and show the password being used but to no avail - but I am sure that
    there was a setting to get passwords used displayed if the did not
    match. Cannot find it now with v1.0.8.

    Try disabling MD5 for that node; otherwise the password is never sent in the clear.

    Andrew

    --- GoldED+/LNX 1.1.5-b20220504
    * Origin: Phoenix BBS * phoenix.bnbbbs.net (1:320/219)
  • From Vincent Coen@2:250/1 to Andrew Leary on Mon May 16 00:18:27 2022
    Hello Andrew!

    Sunday May 15 2022 16:43, you wrote to me:


    Hello Vincent!

    15 May 22 19:39, you wrote to all:

    Is there a way within mbse of setting a specific node address to
    be totally ignore just as soon as its address line is received ?

    If they always call from the same IP address, just configure your
    firewall to reject connections from that IP.

    Why, I have a node in Switzerland who polls every minute of all
    hours and some time twice at the same time with a bad password.

    Now I did set on, every debug setting for almost everything to
    try and show the password being used but to no avail - but I am
    sure that there was a setting to get passwords used displayed if
    the did not match. Cannot find it now with v1.0.8.

    Try disabling MD5 for that node; otherwise the password is never sent
    in the clear.

    cracked, in 1.14.16 as it is a all setting, not avail for a node via 7.
    Thanks,


    Vincent

    --- Mageia Linux v8 X64/Mbse v1.0.8/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)