• Error

    From JOE SCHWEIER@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Wed, 10 Sep 2003 16:20:37 -0400
    From: JOE SCHWEIER
    To: HECTOR SANTOS
    Subject: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063225237.44.0@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 10

    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??


    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From THOMAS TIERNEY@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Wed, 10 Sep 2003 16:40:42 -0400
    From: THOMAS TIERNEY
    To: JOE SCHWEIER
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063226750.44.1063225237@winserver.com>
    References: <1063225237.44.0@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 24

    yikes ,

    thats the old socket wrench control from - crescent I think, look at http://www.socket-wrench.com/, there were two versions
    a freeware control and a commercial control, if its the freeware you should still be able to get it..


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@winserver.com...
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>


    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From FRED BURGESS@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Wed, 10 Sep 2003 19:07:36 -0400
    From: FRED BURGESS
    To: JOE SCHWEIER
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063235557.44.1063225237@winserver.com>
    References: <1063225237.44.0@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 19

    Didn't you say the BBS was closing down?!?!


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@winserver.com...
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>


    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From JOE SCHWEIER@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 08:35:43 -0400
    From: JOE SCHWEIER
    To: THOMAS TIERNEY
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063283743.44.1063226750@winserver.com>
    References: <1063226750.44.1063225237@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 33

    I downloaded the program and it didn't work... and I shouldn't have to
    search the net for the fix... U'd think think Hector would release
    software that just works... and I'm sure it does.... and I'm sure it's
    me...

    Joe


    yikes ,

    thats the old socket wrench control from - crescent I think, look at http://www.socket-wrench.com/, there were two versions
    a freeware control and a commercial control, if its the freeware you
    should still be able to get it..


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@winserver.com...
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>



    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From JOE SCHWEIER@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 08:37:09 -0400
    From: JOE SCHWEIER
    To: FRED BURGESS
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063283829.44.1063235557@winserver.com>
    References: <1063235557.44.1063225237@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 28

    No... I misunderstood something... :) read latest message between
    Andrea and I.

    Sorry for the confusion.

    Joe


    Didn't you say the BBS was closing down?!?!


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@winserver.com...
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>



    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From DAVE GOURD@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 10:04:20 -0400
    From: DAVE GOURD
    To: JOE SCHWEIER
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063289060.44.1063283743@winserver.com>
    References: <1063283743.44.1063226750@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 44

    U'd think that if Hector releases software that didn't work there would
    be a few more people posting than Ur message about it.

    Did you you try doing a search here in the message groups for
    cswsk32.ocx or check to see if there is possibly an UPGRADE that needs
    to be performed?




    I downloaded the program and it didn't work... and I shouldn't have to search the net for the fix... U'd think think Hector would release
    software that just works... and I'm sure it does.... and I'm sure it's
    me...

    Joe


    yikes ,

    thats the old socket wrench control from - crescent I think, look at http://www.socket-wrench.com/, there were two versions
    a freeware control and a commercial control, if its the freeware you should still be able to get it..


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@winserver.com...
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>




    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From FRED BURGESS@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 10:39:35 -0400
    From: FRED BURGESS
    To: JOE SCHWEIER
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063291474.44.1063283829@winserver.com>
    References: <1063283829.44.1063235557@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 35

    Can't read private mail from Andera and you.


    <JOE SCHWEIER> wrote in message
    news:1063283829.44.1063235557@winserver.com...
    No... I misunderstood something... :) read latest message between
    Andrea and I.

    Sorry for the confusion.

    Joe


    Didn't you say the BBS was closing down?!?!


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@winserver.com...
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>





    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From JOE SCHWEIER@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 12:03:59 -0400
    From: JOE SCHWEIER
    To: FRED BURGESS
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063296239.44.1063291474@winserver.com>
    References: <1063291474.44.1063283829@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 36

    It's not private....

    it was a thread in an other area...

    the Santronics is fine... I misunderstood something... there is nothing
    more than than that.



    Can't read private mail from Andera and you.


    <JOE SCHWEIER> wrote in message news:1063283829.44.1063235557@winserver.com...
    No... I misunderstood something... :) read latest message between
    Andrea and I.

    Sorry for the confusion.

    Joe


    Didn't you say the BBS was closing down?!?!


    <JOE SCHWEIER> wrote in message
    news:1063225237.44.0@winserver.com... > -> > I keep getting an error
    when I try to load wccasino!!! > -> > > -> > Can't load (or register) custom control 'cswsk32.ocx' > -> > > -> > I have attached the dialog
    box showing U the error... > -> > > -> > what's up?? > -> > > -> > >

    <<<< Note: message contains attachment: WCCASI~1.BMP >>> > ->



    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From JOE SCHWEIER@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 12:06:21 -0400
    From: JOE SCHWEIER
    To: DAVE GOURD
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063296381.44.1063289060@winserver.com>
    References: <1063289060.44.1063283743@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 57

    Y in hell would I spend my days searching for missing files... WHEN I
    should be able to download a program install it and run it... I paid
    money to do so... Y would I expect any less.

    Microsoft doesn't sell me Word and expect me to spend my time looking
    for missing files... They give me the install that works.

    I try to run the upgrade but it doesn't work...




    U'd think that if Hector releases software that didn't work there would
    be a few more people posting than Ur message about it.

    Did you you try doing a search here in the message groups for
    cswsk32.ocx or check to see if there is possibly an UPGRADE that needs
    to be performed?




    I downloaded the program and it didn't work... and I shouldn't hav
    search the net for the fix... U'd think think Hector would release software that just works... and I'm sure it does.... and I'm sure
    me...

    Joe


    yikes ,

    thats the old socket wrench control from - crescent I think, lo http://www.socket-wrench.com/, there were two versions
    a freeware control and a commercial control, if its the freewar
    should still be able to get it..


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@winserver.
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>





    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From FRED BURGESS@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 12:34:46 -0400
    From: FRED BURGESS
    To: JOE SCHWEIER
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063298385.44.1063296381@winserver.com>
    References: <1063296381.44.1063289060@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 69

    Funny ... My install works!

    And Hector isn't the one who released wcCasino ... it was a 3rd party
    program back when Mustang owned it.

    The install works even now for me.


    <JOE SCHWEIER> wrote in message
    news:1063296381.44.1063289060@winserver.com...
    Y in hell would I spend my days searching for missing files... WHEN I
    should be able to download a program install it and run it... I paid
    money to do so... Y would I expect any less.

    Microsoft doesn't sell me Word and expect me to spend my time looking
    for missing files... They give me the install that works.

    I try to run the upgrade but it doesn't work...




    U'd think that if Hector releases software that didn't work there would
    be a few more people posting than Ur message about it.

    Did you you try doing a search here in the message groups for
    cswsk32.ocx or check to see if there is possibly an UPGRADE that needs
    to be performed?




    I downloaded the program and it didn't work... and I shouldn't hav search the net for the fix... U'd think think Hector would release software that just works... and I'm sure it does.... and I'm sure
    me...

    Joe


    yikes ,

    thats the old socket wrench control from - crescent I think, lo http://www.socket-wrench.com/, there were two versions
    a freeware control and a commercial control, if its the freewar should still be able to get it..


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@winserver.
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>







    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From JOE SCHWEIER@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 13:07:35 -0400
    From: JOE SCHWEIER
    To: FRED BURGESS
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063300055.44.1063298385@winserver.com>
    References: <1063298385.44.1063296381@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 61

    Your point is what??

    Hector sells the program... as seen on the web site...

    Who cares if yours is working... mine is not...

    If you don't have any input... then don't

    I'd like to hear what Hector has to say

    Thanx



    Funny ... My install works!

    And Hector isn't the one who released wcCasino ... it was a 3rd party program back when Mustang owned it.

    The install works even now for me.


    <JOE SCHWEIER> wrote in message news:1063296381.44.1063289060@winserver.com...
    Y in hell would I spend my days searching for missing files... WHEN I should be able to download a program install it and run it... I paid
    money to do so... Y would I expect any less.

    Microsoft doesn't sell me Word and expect me to spend my time looking
    for missing files... They give me the install that works.

    I try to run the upgrade but it doesn't work...




    U'd think that if Hector releases software that didn't work
    there would > -> be a few more people posting than Ur message about
    it. > > -> Did you you try doing a search here in the message groups
    for > -> cswsk32.ocx or check to see if there is possibly an UPGRADE
    that needs > -> to be performed? > > > > > -> -> I downloaded the
    program and it didn't work... and I shouldn't hav > -> -> search the
    net for the fix... U'd think think Hector would release > -> ->
    software that just works... and I'm sure it does.... and I'm sure >
    me... > > -> -> Joe > > > -> -> -> yikes , > > -> -> -> thats the
    old socket wrench control from - crescent I think, lo
    http://www.socket-wrench.com/, there were two versions >
    a freeware control and a commercial control, if its the
    freewar > -> -> -> should still be able to get it.. > >
    <JOE SCHWEIER> wrote in message
    news:1063225237.44.0@winserver. > -> -> -> > I keep getting an error
    when I try to load wccasino!!! > -> -> -> > > -> -> -> > Can't load
    (or register) custom control 'cswsk32.ocx' > -> -> -> > > -> -> -> >
    I have attached the dialog box showing U the error... > -> -> -> > >
    what's up?? > -> -> -> > > -> -> -> > > -> -> -> > > -> -> ->

    <<<< Note: message contains attachment: WCCASI~1.BMP



    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From THOMAS TIERNEY@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 13:09:49 -0400
    From: THOMAS TIERNEY
    To: JOE SCHWEIER
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063300497.44.1063283743@winserver.com>
    References: <1063283743.44.1063226750@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 75

    Joe,

    1. Remove the catalyst stuff by uninstalling if it still exists
    2. Do a search on the file in question
    3. If the file doesnt exist, attempt a re-install
    or
    3. if the file does exist then attempt to register it with com by typing in
    at the command prompt
    regsvr32 cswsk32.ocx, this will register it with the com subsystem.
    4. re-run

    if the file doesnt exist, does exist but isnt registered, or maybe its the wrong version then you will recieve an error such as this.
    (by version I dont mean the actual version of the ocx, but the version of
    the TypeLib info stored as a resource in the ocx)

    The file you are looking for is called an Active-X container or control. It contains a set of exposed "interfaces" that can be reached via com through
    an API called DLLGetClassObject. In order for it to work it needs neccessary information in the registry that describes its location among other things, this is done through a call to DLLRegisterServer which is called when you
    run regsvr32.

    Normally what happens when it is installed, the installer places this information in the registry, any number of things can cause this information not to be entered, like the installer, abnormal installation, and a variety
    of system malfunctions..

    It really doesnt help to lay blame on anyone, this type of error can happen with MS Office, Adobe Photoshop or anything that is installed on a windows
    box. It doesnt happen frequently but it can still happen..

    With a little patience someone here can get you up and running





    <JOE SCHWEIER> wrote in message
    news:1063283743.44.1063226750@winserver.com...
    I downloaded the program and it didn't work... and I shouldn't have to
    search the net for the fix... U'd think think Hector would release
    software that just works... and I'm sure it does.... and I'm sure it's
    me...

    Joe


    yikes ,

    thats the old socket wrench control from - crescent I think, look at http://www.socket-wrench.com/, there were two versions
    a freeware control and a commercial control, if its the freeware you should still be able to get it..


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@winserver.com...
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>





    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From DAVE GOURD@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 15:04:05 -0400
    From: DAVE GOURD
    To: JOE SCHWEIER
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063307045.44.1063296381@winserver.com>
    References: <1063296381.44.1063289060@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 123

    I didn't tell u to look for any missing files, I suggest u try searching
    the MESSAGES here at Santronics using "cswsk32.ocx" as one of your
    search parameters, I know you'll find something about it; someone else
    may have or did have a similar problem or question at one time, and the
    threads around that inquiry may lead you to an answer for your particular dilemma. If you can't take enough initiative to do a little
    researching and self help that's your problem; don't expect us to do it
    for you.

    Microsoft DOES sell you WORD and most of the other MS products and then
    DOES expect that you are patient or savvy enough to find some answers on
    your own, whether you have to UPGRADE or find patch files (gee, dare I
    mention security hole patches and Microsoft in the same breath?) or call
    the help desk or search the knowledge base, etc. (for a price I might
    add). You won't get any farther with MS by implying that they release non-working products than you will here. Cop an unfounded attitude here
    and ye shall reap what ye sows or possibly not reap at all.

    We'd love to help, what OS/ver are you running, are you current with the
    AUP, etc, etc? Give us fish some bait to bite on, when we're hungry
    don't throw us bare hooks and DO NOT throw rocks in our pond to get
    our attention.

    My casino works fine, I can install, uninstall, reinstall it at will
    from win95 to win98 to winnt w.o. problems. At least 1 other person has
    better patience control than you or I- he has offered one or 2 possible solutions to you.

    I hinted (rather sarcastically I admit) for you to search the messages
    here and subtly recommended checking to see if there are any available
    upgrades for wccasino - there is one at least, wccasinoupgrade.exe. I didn't/don't say this will definitively solve your problem, but hoped
    you might try looking around while you await some other input.

    I'm sorry I pissed in your cornflakes, but I am very proud to use the
    WINS products and accept that when/if there are problems that there will
    be answers or solutions eventually. I don't always get answers or
    fixes when I want them and not everything I have from WINS works
    perfectly or exactly as I expect it, BUT IT STILL WORKS TO ONE DEGREE OR ANOTHER, and I paid for mine too, and I also have been active and up
    to date on the AUP since I first purchased WINS, so there!

    Even when I do get upset with or at Hector, I don't make defamatory
    statements or accusations about him or his business practices unless
    I can back it up, and I definitely wouldn't do it out here in public
    for God and everybody else to see.

    Hector releases all his software WORKING at all times. He subsequently
    may have to debug it a bit to get it working PROPERLY, but it still
    works. It is fairly accepted practice to check for updates and patches
    for any software when it is first purchased.

    Saying Hector releases non-working software is like saying Chevy sells non-working cars, it just don't happen. Sometimes things don't work as designed, then we seek fixes (and with Chevy we can only hope for the
    best).

    I also apologize to the rest of the group here for getting into this
    ridiculous flaming. I'm finished.

    --
    D



    Y in hell would I spend my days searching for missing files... WHEN I
    should be able to download a program install it and run it... I paid
    money to do so... Y would I expect any less.

    Microsoft doesn't sell me Word and expect me to spend my time looking
    for missing files... They give me the install that works.

    I try to run the upgrade but it doesn't work...




    U'd think that if Hector releases software that didn't work there
    be a few more people posting than Ur message about it.

    Did you you try doing a search here in the message groups for
    cswsk32.ocx or check to see if there is possibly an UPGRADE that n
    to be performed?




    I downloaded the program and it didn't work... and I shouldn't hav search the net for the fix... U'd think think Hector would release software that just works... and I'm sure it does.... and I'm sure me...

    Joe


    yikes ,

    thats the old socket wrench control from - crescent I think, lo http://www.socket-wrench.com/, there were two versions
    a freeware control and a commercial control, if its the freewar should still be able to get it..


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@winserver.
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>






    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From FRED BURGESS@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 15:22:36 -0400
    From: FRED BURGESS
    To: DAVE GOURD
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063308454.44.1063307045@winserver.com>
    References: <1063307045.44.1063296381@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 140

    THANK YOU DAVE!!!

    You wrote what I was thinking about this matter.

    I was going to say Best Buy sells Micosoft products, but do you expect Best
    Buy to debug and give answers??

    (Used to work for them, then got smart :) )

    <DAVE GOURD> wrote in message news:1063307045.44.1063296381@winserver.com...
    I didn't tell u to look for any missing files, I suggest u try searching
    the MESSAGES here at Santronics using "cswsk32.ocx" as one of your
    search parameters, I know you'll find something about it; someone else
    may have or did have a similar problem or question at one time, and the threads around that inquiry may lead you to an answer for your particular dilemma. If you can't take enough initiative to do a little
    researching and self help that's your problem; don't expect us to do it
    for you.

    Microsoft DOES sell you WORD and most of the other MS products and then
    DOES expect that you are patient or savvy enough to find some answers on
    your own, whether you have to UPGRADE or find patch files (gee, dare I mention security hole patches and Microsoft in the same breath?) or call
    the help desk or search the knowledge base, etc. (for a price I might
    add). You won't get any farther with MS by implying that they release non-working products than you will here. Cop an unfounded attitude here
    and ye shall reap what ye sows or possibly not reap at all.

    We'd love to help, what OS/ver are you running, are you current with the
    AUP, etc, etc? Give us fish some bait to bite on, when we're hungry
    don't throw us bare hooks and DO NOT throw rocks in our pond to get
    our attention.

    My casino works fine, I can install, uninstall, reinstall it at will
    from win95 to win98 to winnt w.o. problems. At least 1 other person has better patience control than you or I- he has offered one or 2 possible solutions to you.

    I hinted (rather sarcastically I admit) for you to search the messages
    here and subtly recommended checking to see if there are any available upgrades for wccasino - there is one at least, wccasinoupgrade.exe. I didn't/don't say this will definitively solve your problem, but hoped
    you might try looking around while you await some other input.

    I'm sorry I pissed in your cornflakes, but I am very proud to use the
    WINS products and accept that when/if there are problems that there will
    be answers or solutions eventually. I don't always get answers or
    fixes when I want them and not everything I have from WINS works
    perfectly or exactly as I expect it, BUT IT STILL WORKS TO ONE DEGREE OR ANOTHER, and I paid for mine too, and I also have been active and up
    to date on the AUP since I first purchased WINS, so there!

    Even when I do get upset with or at Hector, I don't make defamatory statements or accusations about him or his business practices unless
    I can back it up, and I definitely wouldn't do it out here in public
    for God and everybody else to see.

    Hector releases all his software WORKING at all times. He subsequently
    may have to debug it a bit to get it working PROPERLY, but it still
    works. It is fairly accepted practice to check for updates and patches
    for any software when it is first purchased.

    Saying Hector releases non-working software is like saying Chevy sells non-working cars, it just don't happen. Sometimes things don't work as designed, then we seek fixes (and with Chevy we can only hope for the
    best).

    I also apologize to the rest of the group here for getting into this ridiculous flaming. I'm finished.

    --
    D



    Y in hell would I spend my days searching for missing files... WHEN I should be able to download a program install it and run it... I paid
    money to do so... Y would I expect any less.

    Microsoft doesn't sell me Word and expect me to spend my time looking
    for missing files... They give me the install that works.

    I try to run the upgrade but it doesn't work...




    U'd think that if Hector releases software that didn't work there
    be a few more people posting than Ur message about it.

    Did you you try doing a search here in the message groups for cswsk32.ocx or check to see if there is possibly an UPGRADE that n
    to be performed?




    I downloaded the program and it didn't work... and I shouldn't
    hav
    search the net for the fix... U'd think think Hector would
    release
    software that just works... and I'm sure it does.... and I'm sure me...

    Joe


    yikes ,

    thats the old socket wrench control from - crescent I think,
    lo
    http://www.socket-wrench.com/, there were two versions
    a freeware control and a commercial control, if its the
    freewar
    should still be able to get it..


    <JOE SCHWEIER> wrote in message
    news:1063225237.44.0@winserver.
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>








    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From FRED BURGESS@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Thu, 11 Sep 2003 18:13:14 -0400
    From: FRED BURGESS
    To: DAVE GOURD
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063318692.44.1063315890@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 18


    <DAVE GOURD> wrote in message news:1063315890.44.1063308454@winserver.com...
    (I made this private to keep the chatter down, you can take it back
    public if you want, I got nothin to hide)

    Hi Fred, long time no talk, you've helped me a few times in the past,
    not sure if you remember me or not.


    Yes, I remember you ... or at least your name ... I haven't logged onto the BBS in ages... I use OE to read messages (NNTP) and don't know how to make
    them private :)

    I snipped the rest of the message, and I appreciate your comments.

    Oh, it was Best Buy I worked for :)

    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From JOE SCHWEIER@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Mon, 15 Sep 2003 20:57:37 -0400
    From: JOE SCHWEIER
    To: DAVE GOURD
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063673857.44.1063307045@winserver.com>
    References: <1063307045.44.1063296381@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 138

    Sorry...
    I was frustrated...

    I got the program running.. someone told me to run a registry something
    or other ... and it word...

    Just needing to fine tune some things!!!

    Joe

    And... BTW...
    Thanx


    I didn't tell u to look for any missing files, I suggest u try searching
    the MESSAGES here at Santronics using "cswsk32.ocx" as one of your
    search parameters, I know you'll find something about it; someone else
    may have or did have a similar problem or question at one time, and the threads around that inquiry may lead you to an answer for your
    particular dilemma. If you can't take enough initiative to do a
    little researching and self help that's your problem; don't expect us
    to do it for you.

    Microsoft DOES sell you WORD and most of the other MS products and then
    DOES expect that you are patient or savvy enough to find some answers on your own, whether you have to UPGRADE or find patch files (gee, dare I mention security hole patches and Microsoft in the same breath?) or call
    the help desk or search the knowledge base, etc. (for a price I might
    add). You won't get any farther with MS by implying that they release non-working products than you will here. Cop an unfounded attitude here
    and ye shall reap what ye sows or possibly not reap at all.

    We'd love to help, what OS/ver are you running, are you current with the AUP, etc, etc? Give us fish some bait to bite on, when we're hungry
    don't throw us bare hooks and DO NOT throw rocks in our pond to get
    our attention.

    My casino works fine, I can install, uninstall, reinstall it at will
    from win95 to win98 to winnt w.o. problems. At least 1 other person has better patience control than you or I- he has offered one or 2 possible solutions to you.

    I hinted (rather sarcastically I admit) for you to search the messages
    here and subtly recommended checking to see if there are any available upgrades for wccasino - there is one at least, wccasinoupgrade.exe. I didn't/don't say this will definitively solve your problem, but hoped
    you might try looking around while you await some other input.

    I'm sorry I pissed in your cornflakes, but I am very proud to use the
    WINS products and accept that when/if there are problems that there will
    be answers or solutions eventually. I don't always get answers or
    fixes when I want them and not everything I have from WINS works
    perfectly or exactly as I expect it, BUT IT STILL WORKS TO ONE DEGREE OR ANOTHER, and I paid for mine too, and I also have been active and up
    to date on the AUP since I first purchased WINS, so there!

    Even when I do get upset with or at Hector, I don't make defamatory statements or accusations about him or his business practices unless
    I can back it up, and I definitely wouldn't do it out here in public
    for God and everybody else to see.

    Hector releases all his software WORKING at all times. He subsequently
    may have to debug it a bit to get it working PROPERLY, but it still
    works. It is fairly accepted practice to check for updates and patches
    for any software when it is first purchased.

    Saying Hector releases non-working software is like saying Chevy sells non-working cars, it just don't happen. Sometimes things don't work as designed, then we seek fixes (and with Chevy we can only hope for the
    best).

    I also apologize to the rest of the group here for getting into this ridiculous flaming. I'm finished.

    --
    D



    Y in hell would I spend my days searching for missing files... WHEN I should be able to download a program install it and run it... I paid money to do so... Y would I expect any less.

    Microsoft doesn't sell me Word and expect me to spend my time looking
    for missing files... They give me the install that works.

    I try to run the upgrade but it doesn't work...




    U'd think that if Hector releases software that didn't work there
    be a few more people posting than Ur message about it.

    Did you you try doing a search here in the message groups for cswsk32.ocx or check to see if there is possibly an UPGRADE that n
    to be performed?




    I downloaded the program and it didn't work... and I shouldn
    search the net for the fix... U'd think think Hector would r software that just works... and I'm sure it does.... and I'm
    me...

    Joe


    yikes ,

    thats the old socket wrench control from - crescent I thi http://www.socket-wrench.com/, there were two versions
    a freeware control and a commercial control, if its the f
    should still be able to get it..


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@wins
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP >>>







    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From DAVE GOURD@1:124/5013 to All on Thu Jan 31 19:12:17 2019
    Date: Mon, 15 Sep 2003 22:00:38 -0400
    From: DAVE GOURD
    To: JOE SCHWEIER
    Subject: Re: Error
    Newsgroups: win.server.wccasino
    Message-ID: <1063677638.44.1063673857@winserver.com>
    References: <1063673857.44.1063307045@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.4
    Lines: 157

    Don't worry 'bout it, I jerked the chain on this end too, some of us
    take those things rather personal since we have put our time and energy
    into getting our own systems running. I don't care what package you use,
    this web stuff is not all cut and dried - one size fits all, everyone
    gets a chance to troubleshoot and research, it's all part of the
    learning process that makes us administrators.

    I know the frustration, but patience and a passion for adventure in this business is a virtue.


    Good Luck.
    --
    Dave




    Sorry...
    I was frustrated...

    I got the program running.. someone told me to run a registry something
    or other ... and it word...

    Just needing to fine tune some things!!!

    Joe

    And... BTW...
    Thanx


    I didn't tell u to look for any missing files, I suggest u try sea
    the MESSAGES here at Santronics using "cswsk32.ocx" as one of your
    search parameters, I know you'll find something about it; someone
    may have or did have a similar problem or question at one time, an threads around that inquiry may lead you to an answer for your
    particular dilemma. If you can't take enough initiative to do a
    little researching and self help that's your problem; don't expect us
    to do it for you.

    Microsoft DOES sell you WORD and most of the other MS products and
    DOES expect that you are patient or savvy enough to find some answ
    your own, whether you have to UPGRADE or find patch files (gee, da mention security hole patches and Microsoft in the same breath?) o
    the help desk or search the knowledge base, etc. (for a price I might add). You won't get any farther with MS by implying that they release non-working products than you will here. Cop an unfounded attitude
    and ye shall reap what ye sows or possibly not reap at all.

    We'd love to help, what OS/ver are you running, are you current wi
    AUP, etc, etc? Give us fish some bait to bite on, when we're hungry
    don't throw us bare hooks and DO NOT throw rocks in our pond to get
    our attention.

    My casino works fine, I can install, uninstall, reinstall it at will
    from win95 to win98 to winnt w.o. problems. At least 1 other perso
    better patience control than you or I- he has offered one or 2 pos solutions to you.

    I hinted (rather sarcastically I admit) for you to search the mess
    here and subtly recommended checking to see if there are any avail upgrades for wccasino - there is one at least, wccasinoupgrade.exe. I didn't/don't say this will definitively solve your problem, but hoped
    you might try looking around while you await some other input.

    I'm sorry I pissed in your cornflakes, but I am very proud to use the WINS products and accept that when/if there are problems that ther
    be answers or solutions eventually. I don't always get answers or
    fixes when I want them and not everything I have from WINS works perfectly or exactly as I expect it, BUT IT STILL WORKS TO ONE DEG ANOTHER, and I paid for mine too, and I also have been active and up
    to date on the AUP since I first purchased WINS, so there!

    Even when I do get upset with or at Hector, I don't make defamatory statements or accusations about him or his business practices unless
    I can back it up, and I definitely wouldn't do it out here in public
    for God and everybody else to see.

    Hector releases all his software WORKING at all times. He subseque
    may have to debug it a bit to get it working PROPERLY, but it still works. It is fairly accepted practice to check for updates and pat
    for any software when it is first purchased.

    Saying Hector releases non-working software is like saying Chevy s non-working cars, it just don't happen. Sometimes things don't wor designed, then we seek fixes (and with Chevy we can only hope for the best).

    I also apologize to the rest of the group here for getting into this ridiculous flaming. I'm finished.

    --
    D



    Y in hell would I spend my days searching for missing files...
    should be able to download a program install it and run it... I
    money to do so... Y would I expect any less.

    Microsoft doesn't sell me Word and expect me to spend my time l
    for missing files... They give me the install that works.

    I try to run the upgrade but it doesn't work...




    U'd think that if Hector releases software that didn't work
    be a few more people posting than Ur message about it.

    Did you you try doing a search here in the message groups for cswsk32.ocx or check to see if there is possibly an UPGRADE
    to be performed?




    I downloaded the program and it didn't work... and I shouldn search the net for the fix... U'd think think Hector would r software that just works... and I'm sure it does.... and I'm me...

    Joe


    yikes ,

    thats the old socket wrench control from - crescent I thi http://www.socket-wrench.com/, there were two versions
    a freeware control and a commercial control, if its the f should still be able to get it..


    <JOE SCHWEIER> wrote in message news:1063225237.44.0@wins
    I keep getting an error when I try to load wccasino!!!

    Can't load (or register) custom control 'cswsk32.ocx'

    I have attached the dialog box showing U the error...

    what's up??




    <<<< Note: message contains attachment: WCCASI~1.BMP








    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)